Buscar en
Revista Iberoamericana de Automática e Informática Industrial RIAI
Toda la web
Inicio Revista Iberoamericana de Automática e Informática Industrial RIAI Interpolación inversa de características de respuesta transitoria temporal a p...
Información de la revista
Vol. 14. Núm. 1.
Páginas 44-55 (Enero - Marzo 2017)
Compartir
Compartir
Descargar PDF
Más opciones de artículo
Visitas
4108
Vol. 14. Núm. 1.
Páginas 44-55 (Enero - Marzo 2017)
Open Access
Interpolación inversa de características de respuesta transitoria temporal a parámetros de la función de transferencia típica de segundo orden
Inverse interpolation applied to temporal transient response characteristics to parameters of the typical second order transfer function
Visitas
4108
Javier Joglar Alcubilla
Departamento de Aviónica, Instituto Barajas, Avda. América 119, 28042 Madrid, España
Este artículo ha recibido

Under a Creative Commons license
Información del artículo
Resumen
Texto completo
Bibliografía
Descargar PDF
Estadísticas
Resumen

A efectos de obtener una metodología de traslado de especificaciones temporales al dominio de la frecuencia, que minimiza el sobrediseño y la iteración manual en el proceso de búsqueda de un controlador en frecuencia, se propone utilizar aproximaciones sucesivas de forma automática, aplicando algún método de interpolación inversa. En este sentido, se recomiendan técnicas específicas para traslado de especificaciones, para cada tipo de requerimiento, basadas en el “método de Newton por diferencias ascendentes y descendentes de 5° orden”, debido a sus ventajas prácticas frente a otros procedimientos de interpolación. Para ello, se usarán como funciones de interpolación las descriptivas de la señal escalón o de la señal impulso, aproximadas por un modelo de segundo orden con amortiguamiento subcrítico.

Palabras clave:
traslado de especificaciones
dominio de la frecuencia
interpolación inversa
teoría de realimentación cuantitativa
seguimiento
sensibilidad
Abstract

In order to obtain a method of temporary specification translation to the frequency domain, which minimizes overdesign and manual iteration in the process of searching for a controller in frequency, it is proposed to use successive approximations automatically, applying any inverse interpolation. In this regard, specific techniques are recommended to obtain specification translation for each type of requirement, based on the “ascending and descending differences Newton method of 5th order” due to its practice advantages, compared to other interpolation procedures. For this, it will be used as interpolation functions those describing step signal or pulse signal, with subcritical damping and approached with a second order model.

Keywords:
Specifications translation
frequency domain
inverse interpolation
quantitative feedback theory
tracking
sensitivity
Referencias
[Alexaindre et al., 1989]
V. Alexaindre, S. Dormido, M. Mellado, J.R. Peran, J.M. Perez, E. Sanz.
Automatica I. Primera edición.
UNED, (1989), 8436224663,
[Bonnans et al., 2006]
J.F. Bonnans, J.C. Gilbert, C. Lemaréchal, C.A. Sagastizábal.
Numerical optimization: Theoretical and practical aspects. Universitext.
Springer-Verlag, (2006), 354035445X, pp. pxiv+490 http://dx.doi.org/10.1007/978-3-540-35447-5
MR 2265882
[Borghesani et al., 2003]
C. Borghesani, Y. Chait, O. Yaniv.
The QFT control desing Toolboxfor use with MATLAB.
Terasoft Inc., (2003),
[D’Azzo and Houpis, 1995]
J. D’Azzo, C. Houpis.
Linear control systems analysis and design: conventional and modern.
4ªEd, McGraw-Hill, (1995),
Cap18
[Franchek and Herman, 1998]
M.A. Franchek, P.A. Herman.
Direct connection between time-domain performance and frequency-domain characteristics.
International Journal of Robust and Nonlinear Control, 8 (1998), pp. 1021-1042
[Franchek et al., 1997]
M.A. Franchek, P.A. Herman, O.D.I. Nwokah.
“Robust nondiagonal controllers design for uncertain multivariable regulating systems”.
J. Dyn Syst-T ASME, 119 (1997), pp. 80-85
[Franchek and Nwokah, 1995]
M.A. Franchek, O.D.I. Nwokah.
Robust multivariable control of distillation columns using nondiagonal controller matrix.
IMECE, ASME Journal of Dynamic Systems and Control, 57-1, (1995), pp. 257-274
[GARTEUR, 1997]
GARTEUR Action Group FM(AG08),1997. Robust flight control design challenge. Problem formulation and manual: the research civil aircraft model (RCAM), GARTEUR/TP-088-3.
[Gil-Martínez, 2008]
Gil-Martínez M., 2008. Síntesis de controladores robustos mediante el análisis de la compatibilidad de especificaciones e incertidumbre. Ph.D. thesis, Universidad de la Rioja, Spain.
[Horowitz and Sidi, 1972]
I.M. Horowitz, M. Sidi.
Synthesis of feedback systems with large plant ignorance for prescribed time domain tolerances.
International Journal of Control, 16 (1972), pp. 287-309
[Houpis and Rasmussen, 1999]
C.H. Houpis, S.J. Rasmussen.
Quantitative Feedback Theory: fundamentals and applications.
Marcel Dekker Inc, (1999),
[Iyengar, 2008]
S.R.K. Iyengar.
Numerical methods and computation. Interpolation and approximation. Lecture N°.
Dep. of Mathematics, Indian Institute of Technology, (2008),
N 28
[Jayasuriya and Franchek, 1991]
S. Jayasuriya, M.A. Franchek.
Frequency domain design for maximal rejection of persistent bounded disturbances.
J. Dyn Syst-T ASME, 113 (1991), pp. 195-205
[Joglar and Aranda, 2014]
J. Joglar, J. Aranda.
The 9th lnternational Conference on Electrical and Control Technologies, ECT2014, (2014), pp. 30-35
[Joglar-Alcubilla, 2015]
Joglar-Alcubilla J., 2015. Contribución al estudio de diseño de sistemas de control mediante QFT: aplicaciones al diseño de sistemas de control de vuelo y navegación. Ph.D. thesis, ETSI Informática, UNED. Spain.
[Joglar-Alcubilla, 2016]
Joglar-Alcubilla J., 2016. Generic tracking specifications translation from time domain to frequency domain. ArXiv:1601.00346 [cs.SY].
[Krishnan and Cruickshanks, 1977]
K.R. Krishnan, A. Cruickshanks.
Frequency-domain design of feedback systems for specified insensitivity of time-domain response to parameter variation.
International Journal of Control, 25 (1977), pp. 609-620
[Kobylarz et al., 1992]
T. Kobylarz, I.M. Horowitz, C.H. Houpis.
Flight controller design for uncertain and nonlinear plants with pilot compensation.
International Journal of Robust and Nonlinear Control, 2 (1992), pp. 183-209
[Mateos-Aparicio Morales, 2010]
Mateos-Aparicio Morales G., 2010. Métodos de interpolación y ajuste. Elementos de matemática actuarial. UCM, ISBN 9788493811204, Madrid. www.ucm.es/info/sevipres/P4/01/ANEXOS01.php
[Nataraj, 2002]
P.S.V. Nataraj.
Computation of QFT bounds for robust tracking specifications.
Automática, 38 (2002), pp. 327-334
[Ogata, 1993]
K. Ogata.
Ingeniería de control moderna.
Prentice Hall, (1993),
[Wu et al., 1998]
S.F. Wu, M.J. Grimble, S.G. Breslin.
Introduction to quantitative feedback theory for lateral robust flight control systems design.
Control Engineering Practice 6, (1998), pp. 805-828
[Yaniv, 1999]
O. Yaniv.
Quantitative feedback design of linear and nonlinear control systems.
Kluwer Academic Publishers, (1999),
Opciones de artículo
Herramientas