Información del artículo
Resumen
Actualmente existe un gran interés por el desarrollo de aplicaciones industriales utilizando redes inalámbricas, principalmente por el aumento de la flexibilidad del sistema y la disminución de los costos de implementación. Sin embargo, los retrasos y el jitter que introduce la red de comunicaciones en las aplicaciones de control, han dado lugar a que en algunos casos no se obtenga una buena correspondencia entre los resultados experimentales y los objetivos de control propuestos, esto como consecuencia del uso de modelos imprecisos para analizar y diseñar estos sistemas, métodos de validación poco elaborados y plataformas que no soportan los modelos empleados. En este trabajo se presenta un procedimiento de diseño que permite encontrar un modo de funcionamiento óptimo del sistema, que garantiza el cumplimiento de los plazos de tiempo de las aplicaciones, y minimiza el consumo de potencia y los retrasos.
Palabras clave:
Sistemas de tiempo real
Redes de sensores y actuadores inalámbricas
Sistemas embebidos
Monitorización y control en tiempo real
El Texto completo está disponible en PDF
Referencias
[Astrom and Wittenmark, 1997]
K. Astrom, B. Wittenmark.
Computer Control Systems. Theory and design.
Prentice Hall, (1997),
[Audsley et al., 1993]
N. Audsley, A. Burns, M. Richardson, K. Tindell, A.J. Wellings.
Applying New Scheduling Theory to Static Priority Pre-emptive Scheduling.
Software Engineering Journal, (1993),
[Balbastre et al., 2008]
P. Balbastre, I. Ripoll, A. Crespo.
Minimum Deadline Calculation for Periodic Real-Time Tasks in Dynamic Priority Systems.
IEEE Transactions on computers, Vol. 57 (2008),
[Bonivento et al., 2005]
Bonivento A., Sangiovanni-Vincentelli A., Graziosi F., Santucci F.: “SERAN: A Semi Random Protocol Solution for Clustered Wireless Sensor Networks”, Proc. of MASS 2005. 2005.
[Bonivento et al., 2006a]
A. Bonivento, L. Carloni, A. Sangiovanni-Vincentelli.
Platform-Based Design of Wireless Sensor Networks for Industrial Applications.
Proceedings of the conference on Design, automation and test in Europe, (2006), pp. 1103-1107
[Bonivento et al., 2006b]
A. Bonivento, L. Carloni, A. Sangiovanni-Vincentelli.
Platform based design for wireless sensor networks.
Mobile Networks and Applications - Springer, (2006), pp. 469-485
[Branicky et al., 2002]
M. Branicky, M. Phillips, W. Zhang.
Scheduling and feedback codesign for networked control systems.
Proceedings of IEEE Conference on Decision and Control,
[Cena et al., 2008]
I.G. Cena, A.C. Bertolotti, C.V. Zunino.
Industrial Applications of IEEE 802.11e WLANs.
IEEE International Workshop on Factory Communication Systems, 21-23 May, (2008),
[Cervin et al., 2003]
A. Cervin, D. Henriksson, B. Lincoln, J. Eker, K. Årzén.
How Does Control Timing Affect Performance?., Analysis and Simulation of Timing Using Jitterbug and TrueTime.
IEEE Control Systems Magazine, June, (2003),
[Dormido et al., 2008]
S. Dormido, J. Sánchez, E. Kofman.
Muestreo control y comunicación basados en eventos.
Revista Iberoamericana de Automática e Informática Industrial, Vol. 5 (2008), pp. 5-26
[Gregory et al., 1999]
C.W. Gregory, B. Octavian, B. Linda.
Asymptotic Behavior of Networked Control Systems.
Submitted to Control Applications Conference, International Conference on Control Applications,
[Hespanha and Xu, 2007]
J.P. Hespanha, Y. Xu.
A Survey of Recent Results in Networked Control Systems.
Proceedings of the IEEE, Vol. 95 (2007),
[Hristu-Varsakelis and Levine, 2005]
Hristu-Varsakelis D., Levine W. S. (Eds.): “Handbook of Networked and Embedded Control Systems”. Páginas: 677–720. Birkhäuser 2005.
[Hu and Yan, 2008]
S. Hu, W. Yan.
Stability of Networked Control Systems Under a Multiple-Packet Transmission Policy.
IEEE Transactions on Automatic Control, Vol. 53 (2008), pp. 1706-1711
[Huang and Nguang, 2008]
D. Huang, S.K. Nguang.
State Feedback Control of Uncertain Networked Control Systems With Random Time Delays.
IEEE Transactions on Automatic Control, Vol. 53 (2008), pp. 829-834
[Koubâa et al., 2006]
A. Koubâa, M. Alves, E. Tovar.
GTS Allocation Analysis in IEEE 802.15.4 for Real-Time Wireless Sensor Networks.
14th International Workshop on Parallel and Distributed Real-Time Systems (WPDRTS 2006),
[Koubâa et al., 2007]
A. Koubâa, A. Cunha, M. Alves.
A Time Division Beacon Scheduling Mechanism for IEEE 802.15.4/Zigbee Cluster-Tree Wireless Sensor Networks.
Real-Time Systems, 2007. ECRTS ‘07. 19th Euromicro Conference on IEEE Computer Society, (2007),
[Lee et al., 2008]
S. Lee, J.H. Park, K.N. Ha, K.C. Lee.
Wireless Networked Control System Using NDIS-based Four-Layer Architecture for IEEE 802.11b.
IEEE International Workshop on Factory Communication Systems, (2008),
[Lennvall et al., 2008]
T. Lennvall, S. Svensson, F. Hekland.
A Comparison of WirelessHART and Zigbee for Industrial Applications.
IEEE International Workshop on Factory Communication Systems, (2008),
[Lester, 2003]
Lester H. J.: “System architecture for wireless sensor networks”. PhD thesis. University of California, Berkeley. 2003.
[Marinoni and Buttazzo, 2007]
M. Marinoni, G. Buttazzo.
Elastic DVS Management in Processors With Discrete Voltage/Frequency Modes.
IEEE Transactions on industrial informatics, vol. 3 (2007),
[Martínez et al., 2008]
Martínez D., Blanes F., Simo J., Crespo A.: “Evaluación del Comportamiento Temporal de Sistemas Distribuidos de Control Sobre IEEE 802.15.4 y CAN”. 21st Symposium on Integrated Circuits and Systems Design – Workshop on Sensor Networks and Applications. Gramado, Brasil. Septiembre de 2008.
[Martínez et al., 2009]
D. Martínez, F. Blanes, J. Simo, A. Crespo.
Wireless Sensors and Actuators Networks: Characterization and Cases Study for Confined Spaces Healthcare and Control Applications.
Scalable Computing: Practice and Experience Scientific International Journal for Parallel and Distributed Computing, Vol. 10 (2009), pp. 291-305
[Mejia-Alvarez et al., 2002]
P. Mejia-Alvarez, E. Levner, D. Mosse.
Power-Optimized Scheduling Server for Real-Time Tasks,.
Proc. IEEE Real-Time and Embedded Technology and Applications Symp. (RTAS ‘02), pp. 239
[Meshkova et al., 2008]
E. Meshkova, J. Riihijarvi, F. Oldewurtel, Ch. Jardak, P. Mahonen.
Service-Oriented Design Methodology for Wireless Sensor Networks: A View through Case Studies.
IEEE International Conference on Sensor Networks, Ubiquitous, and Trustworthy Computing,
[Moraes et al., 2008]
R. Moraes, P. Portugal, F. Vasques, J.A. Fonseca.
Limitations of the IEEE 802.11e EDCA Protocol when Supporting Real-Time Communication.
IEEE International Workshop on Factory Communication Systems, (2008),
[Pantazis and Vergados, 2007]
Pantazis, N.A.; Vergados, D.D.: “A survey on power control issues in wireless sensor networks”. IEEE Communications Surveys & Tutorials, 4th Quarter 2007. vol 9, No. 4.
[Pillai and Shin, 2001]
P. Pillai, K.G. Shin.
Real-Time Dynamic Voltage Scaling for Low-Power Embedded Operating Systems.
Proc. ACM Symp. Operating Systems Principles, (2001), pp. 89-102
[Prasad et al., 2007]
V. Prasad, T. Yan, P. Jayachandran, Z. Li, S. Son, J. Stankovic, J. Hansson, T. Abdelzaher.
ANDES: an ANalysisbased DEsign tool for wireless Sensor networks.
28th IEEE International Real-Time Systems Symposium,
[Ripoll et al., 1996]
I. Ripoll, A. Crespo, A. Mok.
Improvement in feasibility testing for real-time tasks.
Journal of Real-Time Systems, 11 (1996), pp. 19-40
[Saewong and Rajkumar, in press]
Saewong S. and Rajkumar R.: “Practical Voltage-Scaling for Fixed-Priority RT-Systems”. Proceedings of the 9th IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS’03) 2003 IEEE.
[Salt et al., 2008]
J. Salt, V. Casanova, A. Cuenca, R. Pizá.
Sistemas de control basados en red modelado y diseño de estructuras de control.
Revista Iberoamericana de Automática e Informática Industrial, Vol. 5 (2008), pp. 5-20
[Spuri, 1996]
Spuri M.: “Holistic Analysis for Deadline Scheduled Real-Time Distributed Systems”. Tech. Rep. RR-2873, INRIA, France, April 1996.
[Tabbara et al., 2007]
M. Tabbara, D. Nesic, A.R. Teel.
Stability of Wireless and Wireline Networked Control Systems.
Automatic Control. IEEE Transactions on Automatic Control, Vol. 52 (2007), pp. 1615-1630
[Tindell and Clark, 1994]
K. Tindell, J. Clark.
Holistic Schedulability Analysis for Distributed Hard Real-Time Systems.
Microprocessors and Microprogramming, 40 (1994),
[Tindell et al., 1995]
K. Tindell, A. Burns, A.J. Wellings.
Analysis of Hard Real-Time Communications.
The Journal of Real-Time Systems, 9 (1995),
[Varma et al., 2005]
A. Varma, E. Debes, I. Kozintsev, B. Jacob.
Instruction-Level Power Dissipation in the Intel XScale Embedded Microprocessor.
Proceedings of the SPIE, 17th Annual Symposium on Electronic Imaging Science & Technology. Vol. 5683, pp. 1-8
[Walsh et al., 2002]
G.C. Walsh, H. Ye, L. Bushnell.
Stability analysis of networked control systems.
IEEE Transactions on Control Systems Technology, Vol. 10 (2002), pp. 438-446
[Xiong and Lam, 2009]
J. Xiong, J. Lam.
Stabilization of Networked Control Systems With a Logic ZOH.
IEEE Transactions on Automatic Control, Vol. 54 (2009), pp. 358-363
[Yang, 2006]
T.C. Yang.
Networked control system: a brief survey.
IEE Proc.-Control Theory Appl, Vol. 153 (2006),
[Zhang et al., 2001]
W. Zhang, M. Branicky, S. Phillips.
Stability of networked control systems.
IEEE Control Systems Magazine, (2001), pp. 84-99
[Zhu and Mueller, 2004]
Y. Zhu, F. Mueller.
Feedback EDF Scheduling Exploiting Dynamic Voltage Scaling.
Proceedings of the 10th IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS’04) IEEE,
[Zigbee, in press]
Zigbee Specification. http://www.Zigbee.org
Copyright © 2010. Elsevier España, S.L.. Todos los derechos reservados