covid
Revista Iberoamericana de Automática e Informática Industrial RIAI Integración de dispositivos físicos en un laboratorio remoto de control median...
Información de la revista
Vol. 7. Núm. 1.
Páginas 23-34 (Enero 2009)
Vol. 7. Núm. 1.
Páginas 23-34 (Enero 2009)
Open Access
Integración de dispositivos físicos en un laboratorio remoto de control mediante diferentes plataformas: Labview, Matlab y C/C++
Visitas
3822
R. Costa-Castelló*, M. Vallés**,
Autor para correspondencia
mvalles@isa.upv.es

Corresponding author.
, L.M. Jiménez***, L. Diaz-Guerra*, A. Valera**, R. Puerto***
* Institut d’Organització i Control de Sistemes Industrials, Escola T‘ecnica Superior d’Enginyeria Industrial de Barcelona, Universitat Polit‘ecnica de Catalunya, Av. Diagonal 647,11, 08028-Barcelona
** Departamento de Ingeniería de Sistemas y Automática, Universidad Politécnica de Valencia, Camino de Vera, no14, 46022, Valencia, España
*** Departamento de Ingenieria de Sistemas Industriales, Avda. Universidad s/n, 03202 Elche (Alicante), España
Este artículo ha recibido

Under a Creative Commons license
Información del artículo
Resumen
Bibliografía
Descargar PDF
Estadísticas
Resumen

Los laboratorios remotos de control posibilitan la realización de prácticas con equipos físicos reales que se encuentran ubicados en entornos remotos siendo accesibles por parte de los alumnos en cualquier instante de tiempo y desde cualquier lugar con conexión a Internet. En este artículo se presenta un conjunto de dispositivos físicos incorporados dentro de una esquema global de laboratorios remotos (AutomatL@bs) que posibilitan la realización de prácticas a distancia con estos dispositivos. El rasgo principal común a estos dispositivos consiste en que posibilitan la actuación con sistemas físicos remotos para la realización de prácticas de control clásico con los mismos. Se prestará una especial atención a las diferentes posibilidades de comunicación entre la herramienta visual que dispone el usuario para su interconexión basada en Easy Java Simulations, y la conexión directa con los dispositivos físicos ubicados en los laboratorios remotos. Estos sistemas se han empleado para la realización de prácticas dentro del sistema AutomatL@bs desde el curso 1997/98.

Palabras clave:
Educación en Control
Laboratorio remoto
Laboratorio virtual
Control remoto
Control PID
Técnicas de Laboratorio
El Texto completo está disponible en PDF
Referencias
[AutomatL@bs, 2008]
AutomatL@bs (2008). Red de laboratorios de automatica, http://lab.dia.uned.es/automatlab/.
[Badersten and Avasjö, 1997]
Badersten, L. and A. Avasjö (1997). Ericsson company sweden and lund university. In: 13 EUCEN European Conference.
[Birk and Kenn, 2002]
A. Birk, H. Kenn.
Roboguard, a tele-operated mobile security robot.
Control Engineering Practice, 10 (2002), pp. 1259-1264
[Candelas et al., 2006]
F.A. Candelas, C.A. Jara, F. Torres.
Flexible virtual and remote laboratory for teaching robotics.
IV International Conference on Multimedia and Information and Communication Technologies in Education, 3 (2006), pp. 1959-1963
[Casini et al., 2007]
M. Casini, D. Prattichizzo, A. Vicino.
Operating remote laboratories through a bootable device.
Trans on Industrial Electrics, 54 (2007), pp. 3134-3140
[Christian and Esquembre, 2007]
W. Christian, F. Esquembre.
Modelling physics with easy java simulations.
The Physics Teacher, 45 (2007), pp. 475-480
[Costa-Castello et al., 2005]
R. Costa-Castello, J. Nebot, R. Griñó.
Demonstration of the internal model principle by digital repetitive control of an educational laboratory plant.
IEEE Trans. Educ., 48 (2005), pp. 73-80
[Crossan and Burton, 1993]
G. Crossan, P.F. Burton.
Teleworking stereotypes: a case study.
Journal of Information Science, 19 (1993), pp. 349-362
[Cushing, 2000]
M. Cushing.
Process control across the internet.
Chemical Engineering, 107 (2000), pp. 80-82
[Customer Training Courses, 2003]
Customer Training Courses (2003). Siemens Energy & Automation.
[Diaz et al., 2000]
J. Diaz, C. Queiruga, C. Villar, L. Fava.
A virtual java simulation lab for computer science students.
Proceedings of WebNet World Conference on the WWW and Internet, pp. 982-984
[Domínguez et al., 2005]
M. Domínguez, P. Reguera, J.J. Fuertes.
Laboratorio remoto para la enseñanza de la automática en la universidad de león (españa).
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
[Dormido et al., 2008]
R. Dormido, H. Vargas, N. Duro, J. Sánchez, S. Dormido-Canto, G. Farias, F. Esquembre, S. Dormido.
Development of a web-based control laboratory for automation technicians: The three-tank system.
IEEE Transactions on Education, 58 (2008), pp. 35-45
[Dormido, 2004]
S. Dormido.
Control learning: Present and future.
Annual Reviews in Control, 28 (2004), pp. 115-136
[Dormido and Torres, 2005]
S. Dormido, F. Torres.
Aplicación de las tic's a la educación en automática.
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
[Dormido et al., 2005]
S. Dormido, S. Dormido-Canto, R. Dormido, J. Sanchez.
The role of interactivity in control learning.
International Journal of Engineering Education, 21 (2005), pp. 1122-1133
[Gasa et al., 2005]
D. Gasa, I. Garrido, R. Costa, L. Basañez.
Plataforma de ensayo remoto de controladores basados en autómatas finitos.
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
[Gomes and Bogosyan, 2007]
L. Gomes, S. Bogosyan.
Ss on on e-learning and remote laboratories within engineering education - first part.
Trans. on Industrial Electronics, 54 (2007), pp. 3054-3056
[Guzmán et al., 2005]
J.L. Guzmán, F. Rodríguez, M. Berenguel, S. Dormido.
Laboratorio virtual para la enseñanza de control climático de invernaderos.
Revista Iberoamericana de Autom ática e Informática Industrial, 2 (2005), pp. 3-7
[Hercog et al., 2007]
D. Hercog, B. Gergic, S. Uran, K. Jezernik.
A dsp-based remote control laboratory.
Trans. on Industrial Electronics, 54 (2007), pp. 3057-3068
[Distance Learning, 2003]
ISA Distance Learning (2003). ISA Training Institute.
[Jimenez et al., 2005]
L.M. Jimenez, R. Puerto, O. Reinoso, C. Fernandez, R. Ñeco.
Recolab: Laboratorio remoto de control utilizando matlab y simulink.
Revista Iberoamericana de Automatica e Informatica Industrial, 2 (2005), pp. 64-72
[Katsura et al., 2007]
S. Katsura, K. Ohnishi, K. Ohishi.
Transmission of force sensation by environment quarrier based on multilateral control.
IEEE Transactions on Industrial Electronics, 54 (2007), pp. 898-906
[Luo and Chen, 2000]
R.C. Luo, T.M. Chen.
Development of a multibehaviour based mobile robot for remote supervisory control through the internet.
IEEE Transactions on Mechatronics, 5 (2000), pp. 376-385
[López, 1999]
J. López.
Teleworking in a multinational environment.
Proceedings of the Sixth International Conference on Intelligence in Services and Networks,
[Malo et al., 2008]
Malo, Shane, Griñó Robert.
Adaptive feed-forward cancellation control of a full-bridge dc-ac voltage inverter.
The International Federation of Automatic Control. Proceedings of the 17th World Congress, pp. 4571-4576
[Marange et al., 2007]
P. Marange, F. Gelot, B. Riera.
Remote control of automation systems for des courses.
Trans. on Industrial Electronics, 54 (2007), pp. 3103-3111
[Marin et al., 2005]
R. Marin, P. Sanz, P. Nebot, R. Wirz.
A multimodal interface to control a robot arm via the web: a case study on remote programming.
IEEE Transactions on Industrial Electronics, 52 (2005), pp. 1506-1520
[Mata et al., 2005]
Mata, Enric Xargay and Ramon Costa Castelló. (2005). Laboratorio virtual ejs para el estudio del control repetitivo. In: Actas de las IV Jornadas de Enseñanza a través de Internet/Web de la Ingenieríía de Sistemas y Automática, EIWISA2005 (CEA-IFAC). Thomson. Granada. pp. 33–39. ISBN: 84-9732-451-X.
[McKee and Gatward, 2005]
G.T. McKee, A.J. Gatward.
Escenarios online para robots: Diseño y utilización.
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
[Norman, 1993]
S. Norman.
Will telework for us?.
Library Association Record., 95 (1993), pp. 90-91
[Online, in press]
Online Manufacturing Courses from the Manufacturing Training Network.(MTN).
[Online, 2003]
Online Manufacturing Courses from the Manufacturing Training Network (MTN) (2003). SAE International
[Rösch et al., 2002]
O.J. Rösch, K. Schilling, H. Roth.
Haptic interfaces for the remote control of mobile robots.
Control Engineering Practice, 10 (2002), pp. 1309-1313
[Safaric et al., 2001]
R. Safaric, M. Debevc, R.M. Parkin, S. Uran.
Telerobotics experiments via internet.
IEEE Transactions on Industrial Electronics, 48 (2001), pp. 424-431
[Sala et al., 2006]
A. Sala, M. Vallés, J.L. Díez.
Remote tcp/ip-based process control with time-varying sampling period.
Proc. IEEE International Conference on Control Applications - CCA’06, pp. 2081-2086
[Valera et al., 2005a]
A. Valera, M. Vallés, J.L. Díez.
Simulación y control de procesos físicos de forma remota.
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
[Valera et al., 2005b]
A. Valera, M. Vallés, J.L. Díez, P. Albertos.
Dynamic virtual and remote control laboratory development.
IEEE Control Systems Magazine, 25 (2005), pp. 35-39
[Vallés et al., 2001]
M. Vallés, J.L. Díez, A. Valera.
Setting up a virtual matlab control laboratory.
IFAC-Workshop EDCOM2001: Education in Automatic Control,
[Vargas et al., 2009]
H. Vargas, J. Sánchez-Moreno, S. Dormido, C. Salzmann, D. Gillet, F. Esquembre.
Web-enabled remote scientific environments.
Computing in Science and Engg, 11 (2009), pp. 36-46
[Xargay et al., 2004]
Xargay, Enric and Ramon Costa Castelló (2004).Modelado de una planta diseñada para ilustrar el principio del modelo interno. In: XXV Jornadas de Automática (Editado por J.A. Somolinos, Ed.). Ciudad Real. ISBN 84-688-7460-4.
[Dep, 2004]
Dep Legal: CR-388-2004.
[Yang et al., 2003]
S.H. Yang, X. Chen, J.L. Alty.
Design issues and implementation of internet-based process control systems.
Contr. Eng. Practice, 11 (2003), pp. 709-720
[Zuluaga et al., 2005]
C.A. Zuluaga, C.G. Sánchez, E.A. Rodríguez.
Laboratorio de automática vía internet (lavi).
Revista Iberoamericana de Automática e Informática Industrial, 2 (2005), pp. 3-7
Copyright © 2010. Elsevier España, S.L.. Todos los derechos reservados
Descargar PDF
Opciones de artículo
Herramientas