Buscar en
Archivos de la Sociedad Española de Oftalmología (English Edition)
Toda la web
Inicio Archivos de la Sociedad Española de Oftalmología (English Edition) Halos and multifocal intraocular lenses: Origin and interpretation
Journal Information
Vol. 89. Issue 10.
Pages 397-404 (October 2014)
Share
Share
Download PDF
More article options
Visits
2052
Vol. 89. Issue 10.
Pages 397-404 (October 2014)
Original article
Halos and multifocal intraocular lenses: Origin and interpretation
Halos y lentes intraoculares multifocales: origen e interpretación
Visits
2052
F. Alba-Bueno
Corresponding author
francisco.alba-bueno@upc.edu

Corresponding author.
, F. Vega, M.S. Millán
Departamento de Óptica y Optometría, Universidad Politécnica de Cataluña, Terrassa, Barcelona, Spain
This item has received
Article information
Abstract
Full Text
Bibliography
Download PDF
Statistics
Figures (7)
Show moreShow less
Tables (1)
Table 1. Main characteristics of characterized lenses.
Abstract
Objective

To present the theoretical and experimental characterization of the halo in multifocal intraocular lenses (MIOL).

Method

The origin of the halo in a MIOL is the overlaying of 2 or more images. Using geometrical optics, it can be demonstrated that the diameter of each halo depends on the addition of the lens (ΔP), the base power (Pd), and the diameter of the IOL that contributes to the “non-focused” focus. In the image plane that corresponds to the distance focus, the halo diameter (δHd) is given by: δHd=dpn ΔP/Pd, where dpn is the diameter of the IOL that contributes to the near focus. Analogously, in the near image plane the halo diameter (δHn) is: δHn=dpd ΔP/Pd, where dpd is the diameter of the IOL that contributes to the distance focus. Patients perceive halos when they see bright objects over a relatively dark background. In vitro, the halo can be characterized by analyzing the intensity profile of the image of a pinhole that is focused by each of the foci of a MIOL.

Results and conclusions

A comparison has been made between the halos induced by different MIOL of the same base power (20D) in an optical bench. As predicted by theory, the larger the addition of the MIOL, the larger the halo diameter. For large pupils and with MIOL with similar aspheric designs and addition (SN6AD3 vs. ZMA00), the apodized MIOL has a smaller halo diameter than a non-apodized one in distance vision, while in near vision the size is very similar, but the relative intensity is higher in the apodized MIOL. When comparing lenses with the same diffractive design, but with different spherical-aspheric base design (SN60D3 vs. SN6AD3), the halo in distance vision of the spherical MIOL is larger, while in near vision the spherical IOL induces a smaller halo, but with higher intensity due to the spherical aberration of the distance focus in the near image. In the case of a trifocal-diffractive IOL (AT LISA 839MP) the most noticeable characteristic is the double-halo formation due to the 2 non-focused powers.

Keywords:
Multifocal intraocular lenses
Halo
Glare
Optical quality
Presbyopia
Optical bench
Resumen
Objetivo

Caracterización teórica y experimental del halo en lentes intraoculares (LIO) multifocales.

Método

El halo producido por una LIO multifocal (LIOM) se origina cuando sobre una imagen enfocada se superpone otra desenfocada. Mediante óptica geométrica se demuestra que el diámetro de cada halo depende de la adición de la lente (ΔP), de la potencia base (Pd) y del diámetro de la lente iluminada que contribuye al foco «no-enfocado». En plano imagen que corresponde al foco de lejos, el diámetro del halo (δHd) viene dado por: δHd=dpn ΔP/Pd donde dpn es el diámetro de la LIO que contribuye al foco cercano. Análogamente, en el plano imagen del foco de cerca del diámetro del halo (δHn) viene dado por δHn=dpd ΔP/Pd, donde dpd es el diámetro de LIO que contribuye al foco lejano. Los pacientes perciben halos cuando observan objetos luminosos sobre un fondo relativamente oscuro. In vitro, el halo se puede caracterizar analizando el perfil de intensidad de la imagen de un pinhole que forma cada uno de los focos de una lente multifocal.

Resultados y conclusiones

Hemos comparado los halos producidos por varias LIOM de la misma potencia base (20 D) en un banco óptico. Tal y como predice la teoría, cuanto mayor es la adición de la LIOM de diseños asféricos (SN6AD3 vs. ZMA00), las lentes apodizadas presentan un halo de menor diámetro que las no-apodizadas en visión lejana, mientras que en visión cercana el halo es del mismo tamaño pero la intensidad relativa es mayor en el caso de las apodizadas. Comparando lentes esféricas y asféricas con igual diseño difractivo (SN60D3 vs. SN6AD3) el halo en visión lejana en la lente esférica es mayor, mientras que en visión cercana la lente esférica produce un halo de menor tamaño pero de mayor intensidad debido a la aberración esférica del foco lejano en el plano imagen del foco cercano. En el caso de una lente trifocal (AT LISA 839MP) la característica más distintiva es la aparición de un doble halo debido a los focos lejano e intermedio de la LIO, sobre la imagen enfocada en visión cercana.

Palabras clave:
Lentes intraoculares multifocales
Halo
Deslumbramiento
Calidad óptica
Presbicia
Banco óptico

Article

These are the options to access the full texts of the publication Archivos de la Sociedad Española de Oftalmología (English Edition)
Subscriber
Subscriber

If you already have your login data, please click here .

If you have forgotten your password you can you can recover it by clicking here and selecting the option “I have forgotten my password”
Subscribe
Subscribe to

Archivos de la Sociedad Española de Oftalmología (English Edition)

Purchase
Purchase article

Purchasing article the PDF version will be downloaded

Price 19.34 €

Purchase now
Contact
Phone for subscriptions and reporting of errors
From Monday to Friday from 9 a.m. to 6 p.m. (GMT + 1) except for the months of July and August which will be from 9 a.m. to 3 p.m.
Calls from Spain
932 415 960
Calls from outside Spain
+34 932 415 960
E-mail
Article options
Tools
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos

Quizás le interese:
10.1016/j.oftale.2020.11.010
No mostrar más