Article information
Abstract
This manuscript reports on the fabrication of closed-cell aluminium alloy foams reinforced with carbon nanotubes (CNTs) through a novel approach that combines the powder metallurgy method with colloidal processing step that grants uniform dispersion of CNTs into the aqueous suspension of all powder components. Spraying the as prepared suspension into liquid nitrogen followed by lyophilisation enables obtaining homogeneous spherical granules to be used in the powder metallurgy method. Besides ensuring good dispersion of all powder components in the system, the non-agglomerated form of CNTs and the expansion upon foaming foster their structural integrity under stretched conditions in the final foams for an efficient load transfer.
Keywords:
reinforced aluminium foams
carbon nanotubes
freeze-granulation
powder metallurgy
Full text is only aviable in PDF
References
[1]
H.-P. Degischer, B. Kriszt.
Handbook of Cellular Metals: Production, Processing, Applications.
Wiley-VCH Verlag GmbH & Co. KgaA, (2002),
[2]
I. Duarte, J. Banhart.
Acta Mater, 48 (2000), pp. 2349
[3]
J. Banhart.
Adv. Eng. Mater, 15 (2013), pp. 82
[4]
J. Banhart, H.W. Seeliger.
Adv. Eng. Mater, 10 (2008), pp. 793
[5]
I. Duarte, M. Vesenjak, L. Krstulović-Opara, I. Anžel, J.M.F. Ferreira.
Mater. Design, 66 (2015), pp. 532
[6]
I. Duarte, M. Vesenjak, L. Krstulović-Opara, Z. Ren.
Compos. Struct, 124 (2015), pp. 128
[7]
I. Duarte, M. Vesenjak, L. Krstulović-Opara.
Compos. Struct, 109 (2014), pp. 48
[8]
M. Alizadeh, M. Mirzaei-Aliabadi.
Mater. Design, 35 (2012), pp. 419
[9]
L. Huang, H. Wang, D.H. Yang, F. Ye, Z.P. Lu.
Intermetallics, 28 (2012), pp. 71
[10]
X. Xia, H. Feng, X. Zhang, W. Zhao.
Mater. Design, 51 (2013), pp. 797
[11]
I. Duarte, J.M.F. Ferreira.
Materials, 9 (2016), pp. 79
[12]
P.J.F. Harris.
Carbon nanotube science: synthesis, properties and applications.
2nd edition, Cambridge University Press, (2011),
[13]
C. Tjong.
Mater. Sci. Eng. R, 74 (2013), pp. 281
[14]
F. Baumgärtner, I. Duarte, J. Banhart.
Adv. Eng. Mater, 2 (2000), pp. 168
[15]
I. Duarte, M. Oliveira.
Powder Metallurgy, pp. 47-72
[16]
I. Duarte, E. Ventura, S. Olhero, J.M.F. Ferreira.
Mater. Letters, 160 (2015), pp. 162
[17]
I. Duarte, E. Ventura, S. Olhero, J.M.F. Ferreira.
Carbon, 95 (2015), pp. 589
[18]
B. Chen, S. Li, H. Imai, L. Jia, J. Umeda, M. Takahashi, K. Kondoh.
Compos. Sci. Technol, 113 (2015), pp. 1
[19]
R. George, K.T. Kashyap, R. Rahul, S. Yamdagni.
Scr. Mater, 53 (2005), pp. 1159
[20]
S.J. Yoo, S.H. Han, W.J. Kim.
Scr. Mater, 68 (2013), pp. 711
[21]
S. Li, B. Sun, H. Imai, K. Kondoh.
Carbon, 61 (2013), pp. 216
[22]
D.H. Nam, S.I. Cha, B.K. Lim, H.M. Park, D.S. Han, S.H. Hong.
Carbon, 50 (2012), pp. 2417
[23]
H. Wei, Z. Li, D.-B. Xiong, Z. Tan, G. Fan, Z. Qin, D. Zhang.
Scr. Mater, 75 (2014), pp. 30
Copyright © 2016. Portuguese Society of Materials (SPM)
