Información del artículo
Resumen
En este trabajo se define la arquitectura de un núcleo de control (NC) que permite ejecutar aplicaciones de control empotradas, así como los principales problemas que soportan su desarrollo. Se propone la estructura de los datos y los servicios que debe proveer este núcleo para aplicar varias estrategias de control que pueden ser utilizadas para garantizar seguridad, fiabilidad y economía en sus operaciones. En el trabajo se presentan dos ejemplos que ilustran el uso del nućleo de control.
Palabras clave:
Sistemas Empotrados de Control
Sistemas de Tiempo Real
Núcleo de control
Escasez de recursos
El Texto completo está disponible en PDF
Referencias
[Albertos et al., 2006]
P. Albertos, A. Crespo, J. Simó.
Control kernel: a key concept in embedded control systems.
IFAC Conf. on Mechatronics,
[Albertos et al., 2005a]
P. Albertos, A. Crespo, M. Vallés, I. Ripoll.
Embedded control systems: some issues and solutions.
16th IFAC World Congress,
[Albertos et al., 2007]
P. Albertos, M. Vallés, A. Cuenca, A. Valera.
Essential control in embedded control systems.
IFAC Symp On Cost Oriented Automation,
[Albertos et al., 2005]
P. Albertos, M. Vallés, A. Valera.
Control performances under logic changes in the operational conditions.
Journal of Computer and Systems Sciences International, 44 (2005), pp. 587-593
[Albertos., 1990]
Pedro Albertos.
Block multirate input-outputmodel for sample-data control systems.
IEEE Transactions Automatic Control, 35 (1990), pp. 1085-1088
[Albertos et al., 2000]
Pedro Albertos, O. Manuel, M.E. Salgado.
Trade-off between time delays and control effort.
IFAC Workshop in Advances in Control Education,
[ARTIST2, 2005]
ARTIST2 (2005). Roadmap on Control of Real-Time Computing Systems.
[Årzén and Anton, 2005]
Karl-Erik Årzén, C. Anton.
Control and embedded computing: Survey of research directions.
Proc. 16th IFAC World Congress,
[Årzén et al., 2000]
Karl-Erik Årzén, C. Anton, E. Johan, Sha. Lui.
An introduction to control and scheduling co-design.
Proceedings of the 39th IEEE Conference on Decision and Control,
[Årzén et al., 1999]
Karl-Erik Årzén, B. Bo, E. Johan, C. Anton, N. Klas, P. Patrik, S. Lui.
Integrated control and scheduling.
Technical Report ISRN LUTFD2/TFRT- -7586- -SE. Department of Automatic Control,
[Astrom and Wittenmark, 1995]
Astrom, K. J. and B. Wittenmark (1995). Adaptive Control. Addison Wesley Longman.
[Balbastre et al., 2000]
P. Balbastre, I. Ripoll, A. Crespo.
Control tasks delay reduction under static and dynamic scheduling policies.
Real-Time Computing Systems and Applications, pp. 522
[Balbastre, 2002]
Balbastre, Patricia (2002).Modelo de tareas para la integraci¿on del control y la planificaci¿on en sistemas de tiempo real. PhD thesis. Departamento de Inform¿atica de Sistemas y Computadores, Universidad Polit¿ecnica de Valencia. Valencia, España.
[Cervin, 2003]
Cervin, A. (2003). Integrated Control and Real-Time Scheduling. PhD thesis. Departament of Automatic Control, Lund Institute of Technology. Lund, Sweden.
[Cervin et al., 2002]
A. Cervin, J. Ecker, B. Bernhardsson, K.E. Arzén.
Feedback feedforward scheduling of control tasks.
Real Time Systems, 23 (2002), pp. 25-53
[Cervin et al., 2004]
A. Cervin, L. Bo, E. Johan, Å. Karl-Erik, B. Giorgio.
The jitter margin and its application in the design of real-time control systems.
Proceedings of the 10th International Conference on Real-Time and Embedded Computing Systems and Applications,
[Cervin et al., 2003]
Anton Cervin, Dan Henriksson, Bo Lincoln, Eker Johan, Å. Karl-Erik.
How does control timing affect performance? Analysis and simulation of timing using Jitterbug and TrueTime.
IEEE Control Systems Magazine, 23 (2003), pp. 16-30
[Crespo et al., 2006]
A. Crespo, P. Albertos, M. Vallés, M. Luesma, J. Simó.
Schedulability issues in complex embedded control systems.
Computer-Aided Control Systems Designand 2006 IEEE International Symposium,
[Crespo et al., 1999]
A. Crespo, I. Ripoll, P. Albertos.
Reducing delays in rt control: the control action interval.
14th IFAC World Congress on Automatic Contro, pp. 0
[Fernández et al., 2009]
A. Fernández, P. Albertos, M. Vallés, O. LLanes.
Estructuras de control en sistemas empotrados.
IX Simposio Internacional de Automatización, 9th International Symposium on Automation, Informática 2009,
[Henriksson et al., 2002]
Dan Henriksson, ervin Anton, Å. Karl-Erik.
TrueTime: Simulation of control loops under shared computer resources.
Proceedings of the 15th IFAC World Congress on Automatic Control,
[Kao et al., 2004]
Chung-Yao Kao, Lincoln Bo.
Simple stability criteria for systems with time-varying delays.
Automatica, 40 (2004), pp. 1429-1434
[Klancar and Skrjanc, 2007]
G. Klancar, I. Skrjanc.
Tracking-error model-based predictive control for mobile robots in real time.
Robotics and Autonomous Systems, (2007),
[Mindstorms, in press]
L Mindstorms, LEGO Mindstorms (n.d.). Disponible en:http://mindstorms.lego.com/
[Liu and Layland, 1973]
C.L. Liu, J.W. Layland.
Scheduling algorithms for multiprogramming in a hard-real-time environment.
JACM, 20 (1973), pp. 46-61
[Montenegro et al., 1987]
Montenegro, Arnaldo Gómez and Lilliam Alvarez Díaz (1987). Métodos numéricos del algebra lineal.
[ROBOTC. in pressa]
ROBOTC (n.d.). Disponible en www.robotc.net.
[Wittenmark et al., 1995]
Björn; Wittenmark, Nilsson Johan, Törngren Martin.
Timing problems in real-time control systems.
Proceedings of the 1995 American Control Conference,
[Xia et al., 2008]
Feng Xia, Tian Yu-Chu, Sun Youxian, Dong Jinxiang.
Neural feedback scheduling of real-time control tasks.
CoRR, (2008),
Copyright © 2011. Comité Español de Automática