Effect of heat treatments on Ni-Ti endodontic files | Ciência & Tecnologia dos Materiais

ISSN: 0870-8312

Ciência & Tecnologia dos Materiais is the official journal of SPM, the Portuguese Society of Materials (Sociedade Portuguesa de Materiais), providing a forum for publishing peer-reviewed papers related to both fundamentals of materials science and technological application of engineering materials. The scope of the journal covers a wide range of topics in materials science that are of interest to the SPM, encompassing electrochemistry, corrosion and protection of materials, extractive metallurgy and recycling, electronic and optoelectronic materials, biomaterials, forest materials, polymeric and composite materials, foundry, heat treatment and surface engineering, tribology, and fracture. Science and Technology of Materials welcomes contributions in the form of original research papers, review articles and technical notes reporting advances on those fields, emphasizing new materials, new products and devices, and new technologies. Continued as Science and Tecnology of Materials

Indexada en:

ScienceDirect, Scopus, ESCI (Emerging Sources Citation Index)

Three brands of rotary nickel-titanium endodontic instruments with some comparable geometric features but with different cross-section (similar tip size and same taper of .04) were selected for this study: MTwo .04(35) (VDW GmbH, Germany), K3 .04(30) (SybronEndo, Mexico) and K3XF .04(30) (SybronEndo, Mexico). K3XF is made from novel R-phase heat-treated metal alloy while all other files were made from traditional Ni-Ti alloy. The instruments were analysed under the following conditions: i) as-received (AR), ii) heat treated at 350°C, iii) heat treated at 400°C. The transformation temperatures were determined by differential scanning calorimeter (DSC). Compared to conventionally K3 and MTwo files, R-phase heat treatment K3XF file showed higher transformation temperatures. These results also showed that heat treatments increase the transformation temperatures.

Keywords:

NiTi shape memory alloys

endodontic files

heat treatments

transformation temperatures

El Texto completo está disponible en PDF

References

[1]

K. Otsuka, X. Ren.

Prog. Mater. Sci., 50 (2005), pp. 511

[2]

Z. Sanghvi, K. Mistry.

The Journal of Ahmedabad Dental College and Hospital, 2 (2011), pp. 6

[3]

W.A. Brantley, T.A. Svec, M. Iijima, J.M. Powers, T.H. Grentzer.

J. Endod., 28 (2002), pp. 567

http://dx.doi.org/10.1097/00004770-200208000-00001 | Medline

[4]

X. Wang, S. Kustov, B. Verlinden, J.V. Humbeeck.

Shap. Mem. Superelasticity, 1 (2015), pp. 231

[5]

W. Huang.

Mater. Des., 23 (2002), pp. 11

[6]

Shape Memory Alloys: Modeling and Engineering Applications,

[7]

J.H. Ha, S.K. Kim, N. Cohenca, H.C. Kim.

J. Endod., 39 (2013), pp. 389

http://dx.doi.org/10.1016/j.joen.2012.11.028 | Medline

[8]

S.B. Correia, PhD thesis, Universidade de Lisboa, Portugal, 2009.

[9]

S. Vilaverde Correia, M.T. Nogueira, R.J.C. Silva, L. Pires Lopes, F.M. Braz Fernandes, Proceedings of ESOMAT 2009-8th European Symposium on Martensitic Transformations, Prague, Czech Republic, September 7-11, 2009, p. 07004.

[10]

A. Viana, M. Craveiro de Melo, M. Bahia, V. Buono.

Oral Surg. Oral Med. Oral Pathol.

Oral Radiol. Endod., (2010), pp. 527

[11]

X. Wang, B. Verlinden, J. Van Humbeeck.

Mater. Sci. Technol., (2014), pp. 1517

[12]

Y. Yahata, T. Yoneyama, Y. Hayashi, A. Ebihara, H. Doi, T. Hanawa, H. Suda.

Int. Endod. J., (2009), pp. 621

[13]

G. Kuhn, L. Jordan.

J. Phys. IV, (2001), pp. 553

Indexada en:

Síguenos:

Suscríbase a la newsletter