Characterization of weld strength and toughness in the multi-pass welding of Inconel 625 and Super-duplex stainless steel UNS S32750

Ramkumar, K. Devendranath; Oza, Smitkumar; Periwal, Saurabh; Arivazhagan, N.; Sridhar, R.; Narayanan, S.

doi:10.1016/j.ctmat.2015.04.004

Article information

Abstract

Bibliography

Download PDF

Statistics

Abstract

The present study investigated the weldability of dissimilar metals involving Inconel 625 and Super-duplex stainless steel obtained from continuous current (CC) and pulsed current (PC) gas tungsten arc welding (GTAW) processes employing ER2553 and ERNiCrMo-4 fillers. A comparative analysis on these dissimilar weldments was carried out to establish the structure-property relationships. Microstructure examination was carried out using optical microscopy (OM) and scanning electron microscopy (SEM) techniques. Grain coarsening was observed at the HAZ of UNS S32750 for all the cases. Mechanical tests ascertained that the PCGTA weldments employing ERNiCrMo-4 offered better weld strength and impact toughness. Elaborative studies on the structure – property relationships of these dissimilar weldments were discussed.

Keywords:

Inconel 625

super-duplex stainless steel

CCGTAW

PCGTAW

tensile strength

impact toughness.

Full text is only available in PDF

References

[1]

Michael van Wijngaarden, James Chater. (2006) Cal Energy goes for duplex. Stainless Steel World, 42; http://www.stainless-steel-world.net/pdf/ssw_geo_lr.pdf.

[2]

K. Devendranath Ramkumar, D. Siddharth, S. Patel, D.J. Sri Praveen, P. Choudhury, N. Prabaharan, M. Arivazhagan, Anthony Xavior.

Materials & Design, 62 (2014),

http://dx.doi.org/10.1055/s-0043-112338 | Medline

[3]

K. Devendranath Ramkumar, Parvateneni Mithilesh, Dig Maruthi Varun, Reddy, N. Gopi Reddy Ajay, S. Arivazhagan, Narayanan.

ISIJ International, 54 (2014),

[4]

H. Naffakh, M. Shamanian, F. Ashrafizadeh.

Journal of Materials Processing Technology, 209 (2009),

[5]

H. Shah Hosseini, M. Shamanian, A. Kermanpur.

Material Characterization, 62 (2011),

[6]

J.N. Dupont, J.C. Lippold, S.D. Kiser, Welding Metallurgy Weldability of Nickel Base Alloys, John Wiley & Sons, Hoboken, NJ, 2009.

[7]

R. Sridhar, K. Devendranath Ramkumar, N. Arivazhagan, Acta Metallurgica (English Letters) 27, 6 (2014).

[8]

S.G.K. Manikandan, D. Sivakumar, M. Kamaraj, K. Prasad Rao.

J Mater Process Technology, 214 (2014),

[9]

Ch. Radhakrishna, K. Prasad Rao.

Journal of Materials Science, 32 (1997),

[10]

Jiang Wenchun, Gong Jianming, Tu Shandong, Fan Qinshan , Materials & Design 30, (2009).

[11]

Jiang Wenchun, Luo Yun, Zhang Guodong, Woo Wanchuck, S.T. Tu, Materials & Design 31, (2013).

[12]

K. Devendranath Ramkumar, G. Thiruvengatam, S.P. Sudharsan, Debidutta Mishra, N. Arivazhagan, R. Sridhar, Materials & Design 60, (2014).

[13]

Fabrizia Caiazzo, Vittorio Alfieri, Vincenzo Sergi, Angelo Schipani, Salvatore Cinque.

Intl. Journal of Advanced Manufacturing Technology, 68 (2011),

[14]

G. Madhusudan Reddy, A. Gokhale Amol, K. Prasad Rao.

J Mater Science, 32 (1997),

[15]

P. Ravi vishnu.

Welding in the World, 35 (1995),

[16]

A. Grill.

Metallurgical Transactions B, 12 (1981),

[17]

E. Farahani, M. Shamanian, F. Ashrafizadeh.

AMAE International Journal on Manufacturing and Material Science, 2 (2012),

[18]

R.A. Patterson, J.O. Milewski.

Welding Journal, 64 (1985),

[19]

Sadek A Alber, Abass Mahmoud, Zaghloul Bahaa, Elrefaey Ahmed, Ushio Masao, Trans JWRI 29, 1(2000).

[20]

J.N. Dupont, S.W. Banovic, A.R. Marder.

Welding Journal, (2003),

[21]

T. Ogawa, T. Koseki.

Welding Research Supplement, (1998),

[22]

Ramazan Yılmaz, Mustafa Tümer.

Int. Jl. Adv. Manuf. Technol, 67 (2013),

[23]

Eslam Ranjbarnodeh, Siamak Serajzadeh, Amir Hosein Kokabi, Stefanie Hanke, Alfons Fischer.

Int. Journal of Advanced Manufacturing Technology, 55 (2011),

Indexed in:

Follow us:

Indexed in:

Follow us:

Subscribe to our newsletter