Buscar en
Revista Española de Cirugía Ortopédica y Traumatología
Toda la web
Inicio Revista Española de Cirugía Ortopédica y Traumatología Propiedades de lubricación del líquido sinovial en la artroplastia total de ca...
Información de la revista
Vol. 48. Núm. 3.
Páginas 218-224 (Enero 2004)
Compartir
Compartir
Descargar PDF
Más opciones de artículo
Vol. 48. Núm. 3.
Páginas 218-224 (Enero 2004)
Acceso a texto completo
Propiedades de lubricación del líquido sinovial en la artroplastia total de cadera
Lubrication properties of synovial fluid in total hip replacement
Visitas
5250
G. de la Herrána,
Autor para correspondencia
gherran@euskalnet.net

Correspondencia: C/ Mantulene, 19, 1.° D. 20009 San Sebastián.
, J. Usabiagab
a Servicio de Traumatología y Cirugía Ortopédica del Hospital Comarcal del Bidasoa. Hondarribia, Guipúzcoa
b Servicio de Traumatología y Cirugía Ortopédica del Hospital Donostia. San Sebastián. Guipúzcoa
Este artículo ha recibido
Información del artículo
Objetivo

Determinar las características y propiedades de lubricación del líquido sinovial como lubricante en las prótesis de cadera.

Material y método

Se han estudiado 165 muestras de líquido sinovial, de 81 pacientes, clasificadas en líquido sinovial normal, artrósico, meniscal, inflamatorio y procedente de artroplastias articulares fallidas. Tras determinar su viscosidad se han dividido las muestras en alta viscosidad (líquido sinovial normal y artrósico) y baja viscosidad (líquido sinovial meniscal, inflamatorio y de artroplastias fallidas). Se han realizado las pruebas de desgaste en un dispositivo para estudios tribológicos utilizando como pares de fricción cabezas de cromo-cobalto y cerámica de aluminia contra cotilos de polietileno de alto peso molecular y como lubricante los diferentes líquidos sinoviales. Se determinó la pérdida de masa, la variación del diámetro y los cambios de rugosidad de la superficie de los componentes.

Resultados

El líquido sinovial de alta viscosidad consiguió un mayor pulido de la superficie de los cotilos de polietileno en los dos pares de fricción estudiados. Los líquidos sinoviales de baja viscosidad produjeron mayor desgaste del cotilo que el líquido sinovial de alta viscosidad.

Conclusiones

El aumento de la viscosidad del líquido sinovial mejora las propiedades tribológicas en los pares artificiales utilizados en la fabricación de artroplastias articulares. El líquido articular presente en artroplastias fallidas no parece ser el idóneo, pues el hecho de tener una viscosidad muy baja influye negativamente en sus características tribológicas.

Palabras clave:
prótesis de cadera
desgaste
lubricación
líquido sinovial
Aim

To determine the lubrication characteristics and properties of synovial fluid as a lubricant in hip prostheses.

Materials and methods

A study was made of 165 samples of synovial fluid from 81 patients that was classified as normal, arthritic, meniscal, inflammatory, or failed-arthroplasty synovial fluid. After determining viscosity, samples were divided into high-viscosity (normal and arthritic synovial fluid) and low viscosity (meniscal, inflammatory, and failed arthroplasty) synovial fluid. Tests of wear were carried out in a device for tribological studies using chrome cobalt and aluminia ceramic heads against high-molecular-weight polyethylene cups as the friction pairs and the different synovial fluids as lubricants. Loss of mass, variations in diameter, and changes in the roughness of the component surface were determined.

Results

High-viscosity synovial fluid produced a more polished surface on the polyethylene cups of the friction pairs studied. Low-viscosity synovial fluids were accompanied by more cup wear than high-viscosity synovial fluids.

Conclusions

Increased synovial fluid viscosity improves the tribological properties of the artificial materials used in the manufacture of articular prostheses. The synovial fluid present in failed arthroplasties is inadequate because its low viscosity results in poor tribological properties.

Key words:
hip prosthesis
wear
lubrication
synovial fluid
El Texto completo está disponible en PDF
Bibliografía
[1.]
M. Fernández Fairén, V.K. Polineni, A. Wang.
Ensayo de nuevos materiales en el acetábulo de prótesis totales de cadera. Actas del Curso Básico Fundación SECOT.
pp. 321-329
[2.]
R. Lappalainen, A. Anttila, H. Heinonen.
Diamond coated total hip replacements.
Clin Orthop, 352 (1998), pp. 118-127
[3.]
H.A. McKellop, P. Campbell, S.H. Park, T.P. Schmalzried, P. Grigoris, H.C. Amstutz, et al.
The origin of submicron polyethylene wear debris in total hip arthroplasty.
Clin Orthop, 311 (1995), pp. 3-20
[4.]
C.B. Rieker, P. Köttig, R. Schön, M. Windler, U.P. Wyss.
Clinical wear performance of metal on metal hip arthroplasties.
editors. Alternative bearing surfaces in total joint remplacement, ASTM, STP 1346, American Society for Testing and Materials. Pennsylvania,
[5.]
V.O. Saikko, T. Ahlroos.
Phospholipids as boundary lubricants in wear tests of prosthetic joint materials.
Wear, 207 (1997), pp. 86-91
[6.]
V.O. Saikko, P.O. Paavolainen, P. Slatis.
Wear of the polyethylene acetabular cup. Metallic and ceramic heads compared in a hip simulator.
Acta Orthop Scand, 64 (1993), pp. 391-402
[7.]
V.O. Saikko.
Wear of polyethylene acetabular cups against alumina femoral heads. 5 prostheses compared in a hip simulator for 35 million walking cycles.
Acta Orthop Scand, 64 (1993), pp. 507-512
[8.]
V.O. Saikko.
A simulator study of friction in total replacement hip joints.
Proc Inst Mech Eng [H], 206 (1992), pp. 201-211
[9.]
J.L. Villar González.
de García J. Desgaste de polietileno en la prótesis totales de cadera.
Rev Ortop Traumatol, 41 (1997), pp. 573-578
[10.]
H.J. Mankin, V.C. Mow, J.A. Buckwalter, J.P. Iannotti, A. Ratcliffe.
Forma y función del cartílago articular.
editor. Ciencias básicas en Ortopedia. American Academy of Orthopaedic Surgeons. Edición Española. Volumen 1, pp. 3-45
[11.]
H. Saari, S. Santavirta, D. Nordstrom, P. Paavolainen, Y.T. Konttinen.
Hyaluronate in total hip replacement.
J Rheumatol, 20 (1993), pp. 87-90
[12.]
R.S. Namba, S. Shuster, P. Tucker, R. Stern.
Localization of hyaluronan in pseudocapsule from total hip arthroplasty.
Clin Orthop, 363 (1999), pp. 158-162
[13.]
L. Costa, M.P. Luda, L. Trossarelli, E.M. Brach del Prever, M. Crova, P. Gallinaro.
In vivo UHMWPE biodegradation of retrieved prosthesis.
Biomaterials, 19 (1998), pp. 1371-1385
[14.]
J.A. García-Llorente, E. García Cimbrelo, J. Planas Roselló.
Desgaste del polietileno de muy alto peso molecular. Estudio tribológico.
Rev Ortop Traumatol, 40 (1996), pp. 491-496
[15.]
D. Tao, S. Lu.
The lubrication effect of the glycolipid type bionic synovial fluid on a bone joint.
Lub Eng, 50 (1994), pp. 386-389
[16.]
Z. Lu, H. McKellop.
Frictional heating of bearing materials tested in a hip joint wear simulator.
Proc Inst Mech Eng [H], 211 (1997), pp. 101-108
[17.]
B. Derbyshire, J. Skorecki, V.H. Wheble.
Problems of encapsulation of total joint replacements.
Biomaterials, 1 (1980), pp. 33-37
[18.]
Z.X. Yao, J. Skorecki.
Artificial encapsulation of joint prostheses.
Biomaterials, 6 (1985), pp. 208-212
Copyright © 2004. Sociedad Española de Cirugia Ortopédica y Traumatología (SECOT)
Opciones de artículo
Herramientas
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos