Buscar en
Ciência & Tecnologia dos Materiais
Toda la web
Inicio Ciência & Tecnologia dos Materiais Influence of processing conditions on crystal structure of BiNbO4 ceramics
Información de la revista
Vol. 29. Núm. 1.
Materiais 2015
Páginas e215-e218 (Enero - Abril 2017)
Compartir
Compartir
Descargar PDF
Más opciones de artículo
Vol. 29. Núm. 1.
Materiais 2015
Páginas e215-e218 (Enero - Abril 2017)
Acceso a texto completo
Influence of processing conditions on crystal structure of BiNbO4 ceramics
Visitas
1020
Agata Lisińska-Czekaja,
Autor para correspondencia
agata.lisinska-czekaj@us.edu.pl

Corresponding author.
, Dionizy Czekaja, Julian Plewab
a University of Silesia in Katowice, Institute of Technology and Mechatronics, 12 Żytnia St.,Sosnowiec 41-200, Poland
b University of Applied Sciences Münster, Department of Chemical Engineering, Stegerwaldstrasse 39, D-48565, Steinfurt, Germany
Este artículo ha recibido
Información del artículo
Abstract

Bismuth niobate (BiNbO4) has attracted attention as a low-fired ceramics with promising microwave application potential. It belongs to the bismutocolumbite oxides with similarly to scheelite-like stibiotantalite structure (SbTaO4) A3+B5+O4. The aim of the present research was to fabricate BiNbO4 ceramics by solid state reaction route from the mixture of simple oxides viz. Bi2O3, and Nb2O5, and study its phase composition as well as crystal structure by X-ray diffraction method. The Rietveld refinement method was utilized for analysis of diffraction patterns. It was found that the mass change effects finished at temperature T=500°C and the total mass change was about Δm=-0.78%. It was found that BiNbO4 ceramics sintered in ambient air exhibited multiphase composition, i.e., apart from the major α-BiNbO4 phase, the orthorhombic Bi5Nb3O15, Bi3Nb17O47 and cubic Bi3NbO7 phases were present. An increase in sintering temperature caused an increase in the amount of major α-BiNbO4 phase which adopted an orthorhombic symmetry described well by Pnna(52) space group.

Keywords:
Scheelite-like structure
BiNbO4 ceramics
sintering
X-ray diffraction
phase analysis
structural analysis
El Texto completo está disponible en PDF
References
[1]
Call 2015 for Research Proposals, <http://www.chistera.eu) 2015.(accessed 18.03.2015).
[2]
W. Wersing.
Curr. Opin. Solid State Mater. Sci., 1 (1996), pp. 715
[3]
H. Kagata, T. Inoue, J. Kato, I. Kameyama.
Jpn. J. Appl. Phys., 31 (1992), pp. 3152
[4]
Huang Cheng-Liang, Weng Min-Hang, Shan Gai-Ming.
J. Mater. Sci., 35 (2000), pp. 5443
[5]
N.M. Sammes, G.A. Tompsett, H. Nafe, F. Aldinger.
J. Eur. Ceram. Soc., 19 (1999), pp. 1801
[6]
Eung Soo Kim, Woong Choi.
J. Eur. Ceram. Soc., 26 (2006), pp. 1761
[7]
Liou Yi-Cheng, Tsai Wen-Chou, Chen Hong-Meng.
Ceram. Int., 35 (2009), pp. 2119
[8]
M. Płońska, D. Czekaj.
Arch. Metall. Mater., 56 (2011), pp. 1169
[9]
D. A. Lisinska-Czekaj.
Czekaj, Key Eng. Mater., 512–515 (2012), pp. 1212
[10]
ISCD Database, FIZ Karlsruhe, <http://www.fizkarlsruhe.de>, 2015.(accessed 20.06.2015).
[11]
H.M. Rietveld.
Aust. J. Phys., (1988), pp. 113
Copyright © 2017. Portuguese Society of Materials (SPM)
Opciones de artículo
Herramientas
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos