Buscar en
Ciência & Tecnologia dos Materiais
Toda la web
Inicio Ciência & Tecnologia dos Materiais Effect of the chemical milling process on the surface of titanium aluminide cast...
Journal Information
Vol. 29. Issue 1.
Materiais 2015
Pages e40-e45 (January - April 2017)
Share
Share
Download PDF
More article options
Vol. 29. Issue 1.
Materiais 2015
Pages e40-e45 (January - April 2017)
Full text access
Effect of the chemical milling process on the surface of titanium aluminide castings
Visits
1326
Rui Neto, Teresa Duarte
Corresponding author
tpd@fe.up.pt

Corresponding author.
, Jorge Lino Alves, Francisco Torres, João Pinto
INEGI, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
This item has received
Article information
Abstract

Most of titanium aluminide (TiAl) castings used in the automotive and aeronautical industries, such as turbines, are high added- value parts with complex geometries. Due to high reactivity of TiAl cast into ceramic moulds, most of the castings require post- processing in order to remove a brittle surface layer named alpha case. Furthermore, the complex geometry and thin walls of this type of components makes difficult to cast net shape parts; so, near-net shape components with machining allowance are often produced to improve mould filling (better fluidity). To solve this technological limitation, the chemical milling process is used to eliminate this layer and the machining allowance. In bibliography there are only a few systematic studies about the influence of chemical milling in TiAl surface castings. So, this experimental work seeks to contribute to understand the influence of this finishing process on the TiAl castings surface quality (dimensional accuracy, roughness and microhardness) and intends to establish which of the two chemical solutions tested is better for chemical milling of TiAl castings.

Keywords:
Chemical milling
titanium
titanium aluminide
investment casting
Full text is only aviable in PDF
References
[1]
W.J. Boettinger, et al.
Metall. Mater. Trans. B, 31 (2000), pp. 6
[2]
J. Barbosa, C.S. Ribeiro, A.C. Monteiro.
Intermetallics, 15 (2007), pp. 7
[3]
M. Altindis, et al.
Adv. Eng. Mater, 13 (2011), pp. 4
[4]
K.S. Chan, et al.
Metall. Mater. Trans. A, 39 (2007), pp. 1
[5]
P. Teresa, Duarte, J. Neto Rui, Félix Rui, Lino F. Jorge.
Mater. Sci. Forum., (2008), pp. 587
[6]
A. Spear, A. Ingraffea.
Corros. Sci., 68 (2013), pp. 144
[7]
D. Tomlinson, J. Wichmann.
NASF Surf. Technol., 78 (2014 June 1-7),
White Papers
[8]
J. Arredondo, B. Colleary, S. Miskell, B. Sweet.
BS Project Report.
Worcester Polytechnic Institute, (2010),
[9]
ASM Handbook.
ASM International, (1989),
[10]
A. Labak.
BS Project Report.
Worcester Polytechnic Institute, (2010),
[11]
W. Say, Y. Tsai.
Surf. Coat. Technol., 176 (2004), pp. 337
[12]
Y.L. Chen, Chemical Milling of Titanium, US Patent 4,900, 398, 1990.
[13]
F. Torres.
MSc thesis.
Faculdade de Engenharia da Universidade do Porto, Porto, (2014),
[14]
T. Barrigana.
MSc thesis.
Faculdade de Engenharia da Universidade do Porto, Porto, (2013),
[15]
J. Pinto.
MSc thesis.
Faculdade de Engenharia da Universidade do Porto, Porto, (2015),
Copyright © 2017. Portuguese Society of Materials (SPM)
Article options
Tools
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos