A review on natural areca fibre reinforced polymer composite materials

Kamath, Sakshi S.; Sampathkumar, Dhanalakshmi; Bennehalli, Basavaraju

doi:10.1016/j.ctmat.2017.10.001

Article information

Abstract

Download PDF

Statistics

Abstract

Natural fibres, nowadays; have become the matter of discussion in the research field amongst various scientists to inculcate it in the formation of composites instead of production of composites using synthetic fibres like glass, carbon and aramid. This is due to various advantages associated with natural fibres like eco-friendly, low cost, availability in abundance and its bio-degradability. Lots of work has been carried out in the production of natural fibre reinforced polymer composites, using natural fibres like jute, hemp, cotton, sisal, kenaf, bagasse, areca, abaca, bamboo etc. and their properties have been studied. Here is an attempt made on the literature survey of areca fibre reinforced polymer composites where different properties of areca fibres, its maturity level, surface treatment effect on properties of fibres, composite formation with different matrices, its mechanical properties, thermal and acoustic properties related to different composites has been highlighted.

Keywords:

natural fibres

natural fibre composites

betel nut/areca nut fibres and composites

chemical treatment

mechanical properties

Full text is only aviable in PDF

References

[1]

M.N. Islam, M.R. Rahman, M.M. Haque.

Composites Part A., 41 (2010), pp. 192

[2]

A.K. Bledzki, J. Gassan.

Prog. Polym. Sci, 24 (1999), pp. 221

[3]

A.R. Sanadi, D.F. Caulfield, R.M. Rowell.

Ind. Eng. Chem. Res, 34 (1995), pp. 1889

[4]

A.K. Bleddzki, O. Faruk.

Composites Part A., 37 (2006), pp. 1358

[5]

L.M. Matuana, C.B. Park, J.J. Balatinecz.

Polym. Eng. Sci, 38 (1998), pp. 1862

[6]

M.M. Kabir, H. Hwang, K.T. Lau, F. Cardona.

Composites Part B., 43 (2012), pp. 2883

[7]

A.K. Kaw.

Mechanics of Composite Materials.

Taylor & Francis, (1997),

[8]

J.M.L. Reis.

Constr. Build. Mater, 20 (2006), pp. 497

[9]

Z. Li, X. Wang, L. Wang.

Composites Part A., 37 (2006), pp. 497

[10]

M.M. Kabir, H. Wang, K.T. Lau, F. Cardona.

Composites Part B., 43 (2012), pp. 2883

[11]

K.G. Satyanarayana, K.K. Ravikumar, K. Sukumaran, P.S. Mukherjee, S.G.K. Pillai, A.K. Kulakarni.

J. Mater. Sci., 21 (1986), pp. 51

[12]

V.P. Cyras, C. Vallo, J.M. Kenny, A. Vazquez.

J. Compos. Mater, 38 (2004), pp. 1387

[13]

Y. Seki.

Mater. Sci. Eng. A, 508 (2009), pp. 247

[14]

P. Ramadevi, S. Dhanalakshmi, B. Bennehalli, C.V. Srinivasa.

Bioresor, 7 (2012), pp. 3515

[15]

K. Adekunle, D. Akesson, M. Skrifvars.

J. Appl. Polym. Sci, 116 (2010), pp. 1759

[16]

M.S. Sreekala, M.G. Kumaran, S. Joseph, M. Jacob.

Appl. Compos. Mater, 7 (2000), pp. 295

[17]

L.Y. Mwaikambo, N. Tucker, A.J. Clark.

Macromol. Mater. Eng, 292 (2007), pp. 993

[18]

B. Wang, S. Panigrahi, L. Tabil, W. Crerar.

J. Reinf. Plast. Compos, 26 (2007), pp. 447

[19]

S. Jain., R. Kumar, U.C. Jindal.

J. Mater. Sci, 27 (1992), pp. 4598

[20]

M.N. Cazaurang-Martinez, P.J. Herrero-Franco, P.I. Gonzalez-Chi, M. Vega.

J. Appl. Polym. Sci, 43 (1991), pp. 749

[21]

L.Y. Mwaikambo, M.P. Ansell.

2nd International Wood and Natural Fibre Composites, (1999),

[22]

H.S. Yang, H.J. Kim, J. Son, H.J. Park, B.J. Lee, T.S. Hwang.

Compos. Struct, 63 (2004), pp. 305

[23]

P.J.H. Franco, A.V. Gonzalez.

Composites Part B, 36 (2005), pp. 597

[24]

A.S. Singha, V.K. Thakur.

Bull. Mater. Sci, 31 (2008), pp. 791

[25]

V. Vilay, M. Mariatti, R. Mat Taib, M. Todo.

Compos. Sci. Technol, 68 (2008), pp. 631

[26]

M. Haq, R. Burgueno, A.K. Mohanty, M. Misra.

Compos. Sci. Technol, 68 (2008), pp. 3344

[27]

V.K. Thakur, A.S. Singha.

Iran. Polym. J, 19 (2010), pp. 3

[28]

A.S. Singha, B.S. Kaith, I. Kaur, A.J. Khanna.

J. Chem, 8 (2011), pp. 1478

[29]

M. Yusoff, M. Salit, N. Ismail, R. Wirawan.

Sains. Malays, 39 (2010), pp. 87

[30]

M. Islam, S. Hamdan, M. Rahman, I. Jusoh, A. Ahmed, M. Idrus.

Bioresour. Technol, 6 (2011), pp. 737

[31]

M.A. Maleque, F.Y. Belal, S.M. Sapaun.

Arab. J. Sci. Eng, 32 (2007), pp. 359

[32]

S.A. Paul, A. Boudenne, L. Ibos, Y. Candau, K. Joseph, S. Thomas.

Composites Part A., 39 (2008), pp. 1582

[33]

N.A. Ahad, N. Parimin, N. Mahmed, S.S. Ibrahim, K. Nizzam, Y.M. Ho.

J. Nucl. Technol, 6 (2009), pp. 155

[34]

M. Boopalan, M. Niranjanaa, M.J. Umapathy.

Composites Part B., 51 (2013), pp. 54

[35]

V.P. Arthanarieswaran, A. Kumaravel, M. Kathirselvam.

Mater. Des, 64 (2014), pp. 194

[36]

A.K. Ray, S. Mondak, S.K. Das.

J. Mater. Sci, 40 (2009), pp. 5249

[37]

P. Ramadevi, S. Dhanalakshmi, R.P. Ranganagowda, B. Bennehalli, P. Badyankal, C.V. Srinivasa.

Cienc. Tecnol. Mater, 26 (2014), pp. 142

[38]

P. Ramadevi, S. Dhanalakshmi, R.P. Ranganagowda, B. Bennehalli, C.V. Srinivasa.

J. King Saud. Univ. Eng. Sci, 29 (2017), pp. 289

[39]

B. Bennehalli, C.V. Srinivasa P. Ramadevi, S. Dhanalakshmi, Handbook of composites from renewable materials, Volume 6, Chapter 13, Wiley, 2017, pp 353.

[40]

W. Wang, G. Huang.

Mater. Des, 30 (2009), pp. 2741

[41]

A. Chanakan, C. Sarocha, H. Jonjit, K. Joseph.

Composites Part B., 40 (2009), pp. 633

[42]

E.B. Harmida, V.I. Mega.

Composites Part A., 38 (2007), pp. 1387

[43]

A. Etaati, S. Pather, Z. Fang, H. Wang.

Composites Part B., 62 (2014), pp. 19

[44]

D.G. Hepworth, R.N. Hobson, D.M. Bruce, J.W. Farrent.

Composites Part A., 31 (2018), pp. 1279

[45]

P. Pantamanatsopa, W. Ariyawiriyanan, T. Meekeaw, R. Suthamyaong, K. Arrub, H. Energy.

Procedia. Hamada, 56 (2014), pp. 641

[46]

P.A. Kumar, S. Chakraborty, M. Ray.

Chem. Eng. J, 141 (2008), pp. 130

[47]

J. Jawaid, H.P.S.A. Khalil, A. Abu Bakar, P.N. Khanam.

Mater. Des, 32 (2011), pp. 1014

[48]

D. Ray, B.K. Sarkar, A.K. Rana, N.R. Bose.

Composites Part A, 32 (2001), pp. 119

[49]

M.A. Khan, M.H. Hassan, L.T. Drzal.

Composites Part A, 36 (2005), pp. 71

[50]

D. Ray, B.K. Sarkar, A.K. Rana, N.R. Bose.

Composites Part A, 33 (2002), pp. 233

[51]

R. Mahjoub, J.M. Yatim, A.R.M. Sam, M. Raftari.

Mater. Des, 64 (2014), pp. 640

[52]

Y.A. El-Shekeil, S.M. Sapuan, M. Jawaid, O.M. Al-Shuja.

Mater. Des, 58 (2014), pp. 130

[53]

M.A. Martin, L.A. Forato, L.H.C. Mattoso, L.A. Colnago.

Carbohydr. Polym, 64 (2006), pp. 127

[54]

A. Belaadi, A. Bezazi, M. Bourchak, F. Scarpa, C. Zhu.

Composites Part B, 67 (2014), pp. 481

[55]

P.A. Sreekumar, S.P. Thomas, J.M. Saiter, K. Joseph, G. Uniikrishnan.

Composites Part A, 40 (2009), pp. 1777

[56]

A. Vera, A. Vazquez.

Composites Part A, 37 (2007), pp. 1672

[57]

N. Vekateshwaran, A. Elayaperumal, A. Alavudeen, M. Thiruchitrambalam.

Mater. Des, 32 (2011), pp. 4017

[58]

C.V. Srinivasa, B. Bennehalli, M.G. Kenchappa, R.P. Gowda.

Bioresor, 5 (2010), pp. 1846

[59]

L. Yusriah, S.M. Sapuan, E.S. Zainudin, M. Mariatti.

Procedia. Chem, 4 (2012), pp. 87

[60]

N.H. Padmaraj, M.K. Viajy, R. Pai, S. Shenoy, Krishnamoorthy, National Conference on Trends in Mechanical Engineering 2010.

[61]

S. Dhanalakshmi, P. Ramadevi, B. Basavaraju, S.C. Venkateshappa.

Int. J. Agr. Sci, 4 (2012), pp. 227

[62]

S. Dhanalakshmi, P. Ramadevi, B. Basavaraju, S.C. Venkateshappa.

Cienc. Technol. Mater, 27 (2015), pp. 121

[63]

J.S. Binoj, R. Edwin Raj, V.S. Sreenivasan, G.R. Thusnavis.

J. Bionic. Eng, 13 (2016), pp. 156

[64]

S. Dhanalakshmi, P. Ramadevi, R.P. Ranganagowda, B. Pramod, B. Basavaraju.

Chem. Sci. Rev. Lett, 3 (2014), pp. 957

[65]

S. Dhanalakshmi, P. Ramadevi, B. Basavaraju.

J. Apl. Chem, 8 (2015), pp. 43

[66]

W.L. Lai, M. Mariatti, M. Jani.

Polym. Plast. Tecnol. Eng, 47 (2008), pp. 1193

[67]

E. Jayamani, S. Hamdan, M.R. Rahman, M. Khusairy.

Proc. Eng, 97 (2014), pp. 545

[68]

S.B. Hazarika, S.U. Choudhury, S.S. Panja, S.K. Dolui, B.C. Ray.

J. Sci. Ind. Res, 74 (2015), pp. 589

[69]

K. Dey, S. Ganguly, R.A. Khan, M.A. Khan.

J. Compos. Biodegrade..

Polym, 1 (2013), pp. 1

[70]

N.H. Padmaraj, M.V. Kini, B.R. Pai, B.S. Shenoy.

Proc. Eng, 64 (2013), pp. 966

[71]

S.S. Heckadka, M.V. Kini, R.P. Ballambat, S.S. Beloor, S.R. Udupi, U.A. Kini.

Int. J. Manuf. Eng, (2014),

[72]

S.S. Heckadka, S.Y. Nayak, S.R. Vikas, M.V. Kini, N.H. Padmaraj.

Indain J. Sci. Technol, 9 (2016),

[73]

M.M. Hassan, M.H. Wagner, H.U. Zaman, M.A. Khan.

J. Nat. Fibres, 7 (2010), pp. 165

[74]

M.M. Hassan, M.H. Wagner, H.U. Zaman, M.A. Khan.

J. Adhes. Sci. Technol, 25 (2011), pp. 615

[75]

J. Chakrabarty, M.M. Hassan, M.A. Khan.

J. Polym. Environ, 20 (2012), pp. 501

[76]

S. Siddika, A. Sharif.

Int. J. Inno. Sci. Res, 19 (2015), pp. 319

[77]

P. Poddar, M.S. Islam, S. Sultana, H.P. Nur, A.M.S. Chowdhury.

J. Mat. Sci. Eng, 5 (2016),

[78]

R.P. Swamy, G.C. Mohan, Y. Vrushabendrappa.

J. Reinf. Plast. Compos, 23 (2004), pp. 1373

[79]

G.C.M. Kumar.

Proceedings of the World Congress on Engineering, 2 (2008),

[80]

K. Naik, R.P. Swamy.

Int. J. Eng. Res. Appl, 4 (2014), pp. 185

[81]

P. Naik, V. Kumar, S. Kumar, K.R. Srinivasa.

Am. J. Mat. Sci, 5 (2015), pp. 140

[82]

K.N. Bharath, R.P. Swamy.

Int. J. Recent Trends Eng, 1 (2009), pp. 60

[83]

K.N. Bharath, R.P. Swamy, J. Purity.

Util. React. Environ, 1 (2012), pp. 517

[84]

C.V. Srinivasa, A. Arifulla, N. Goutham, T. Santosh, H.J. Jeetendra, R.B. Ravikumar, S.G. Anil, D.G. Kumar, J. Ashish.

Mater. Des, 32 (2011), pp. 2469

[85]

C.V. Srinivasa, K.N. Bharath.

International Journal of Chemical, Molecular, Nuclear.

Materials and Metallurgical Engineering, 7 (2013), pp. 240

[86]

M.R. Chethan, S.G. Gopala Krishna, R. Chennakeshava, M. Majunath.

Int. J. Eng. Technol. Manag..

Appl. Sci, 3 (2016), pp. 412

[87]

C.V. Srinivasa, K.N. Bharath.

J. Mater. Environ. Sci, 2 (2011), pp. 351

[88]

S. Kumar, S.G. Gopalakrishna, H.R. shivakumar, K.S. Rai.

IJARSE, 4 (2015), pp. 1635

[89]

N.H. Padmaraj, A. Suresh, V. Nayak, O. Anand, E.J.D. Pavan.

IJCEM, 3 (2016), pp. 24

[90]

K.G. Vinayraj, B.C. Ashok.

Int. J. Mech. Ind..

Technol, 4 (2016), pp. 66

Indexed in:

Follow us:

Indexed in:

Follow us:

Subscribe to our newsletter