Buscar en
Ciência & Tecnologia dos Materiais
Toda la web
Inicio Ciência & Tecnologia dos Materiais Troca de processo de fabricação da trava da chave catraca
Journal Information
Vol. 26. Issue 1.
Pages 70-76 (January - June 2014)
Share
Share
Download PDF
More article options
Visits
2330
Vol. 26. Issue 1.
Pages 70-76 (January - June 2014)
Full text access
Troca de processo de fabricação da trava da chave catraca
Exchange of manufacturing process ratchet pawl
Visits
2330
Viviane de Castro Dornelesa, José C.K. de Verneyb,
Corresponding author
jcverney@ulbra.br

Autor para correspondencia.
a Senai-CETEMP/RS, BR 116, n°3239, São Leopoldo/RS, 93025-000, Brasil
b Universidsade Luterana do Brasil (ULBRA), Eng. Mecânica, PPGEMPS, Av. Farroupilha, 8001,Canoas/RS, 91.425-900, Brasil
This item has received
Article information
Abstract
Full Text
Bibliography
Download PDF
Statistics
Resumo

O objetivo deste trabalho é viabilizar a troca de processo de fabricação da trava, um dos componentes do conjunto da ferramenta manual chave da catraca, que atualmente é fabricado pelo processo de microfusão. O desenvolvimento se deu primeiramente em analisar os possíveis processos que pudessem atender aos requisitos técnicos que a peça exige. Após pesquisa, o processo que melhor atendeu as solicitações foi à metalurgia do pó. Para confirmar as pesquisas, foi construído um protótipo da peça pelo processo de metalurgia do pó, onde a liga para matéria-prima foi adaptada conforme as exigências mecânicas que a peça irá sofrer. Após sua moldagem, o protótipo passou pela etapa de sinterização e tratamento de superfície para aumentar a dureza e a resistência ao desgaste. Os protótipos foram montados em chaves e submetidos ao ensaio de torque, onde foi aplicado 62N.m conforme a norma DIN 3122 que rege o produto. Todas as chaves testadas foram aprovadas, mas uma delas, que passou pelo tratamento de carbonitretação, apresentou resistência ao torque acima de 98N.m.

Palavras-chave:
metalurgia do pó
microfusão
sinterização.
Abstract

The objective of this paper is to make feasible the exchange of the manufacturing process of pawls, one of the components of manual ratchet wrench tool, which currently is manufactured by the micro fusing process. The development has taken place, primarily, in analyzing the possible processes that could meet the technical requirements that the part requires, and after research, the process that has best met the requirements was powder metallurgy. To confirm the research, a prototype of the part has been made through the powder metallurgy process, in which the alloy for raw material has been adapted to the mechanical demands that the part will undergo. After molding, the prototype has gone through sintering and surface treatment to increase hardness and wear resistance. The prototypes have been assembled in six wrenches and subjected to torque test, in which has been applied 62N.m, according to DIN 3122 which regulates the product. All 6 wrenches tested have been approved, but the sample 1 that had undergone carbonitriding treatment has shown the greatest resistance, resisting 98N.m.

Keywords:
powder metallurgy
investment casting
sintering.
Full Text
Referencias no citadas

[1–7].

Referências
[1]
J.M.G.C. Ferreira.
Tecnologia da Fundição.
AEIST, (1996),
[2]
Norma DIN 3120 - Verbindungsvierkante für handbetätigte Schraubwerkzeuge (Driving squares for hand- operated socket wrenches), 1993.
[3]
Norma DIN 3122 - Antriebsteile mit Außenvierkant für handbetätigte Steckschlüsseleinsätze (Driving parts for hand operated square drive socket wrenches) 1989.
[4]
Norma ISO 4507-2000 - Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test, 2000.
[5]
J.M.G.C. Ferreira. Tecnologia da Pulverometalurgia, AEIST, Lisboa, 2002.
[6]
H.A. Ferguson. Heat Treating of Powder Metallurgy Steels, in: Heat Treating, vol. 4, ASM Metals Handbook. Materials Park, 1991. pp 554-555.
[7]
Höganäs Handbook for Iron and Steel Powders for Sintered Components, Copyright Höganäs AB, 2004.
Article options
Tools
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos