x

¿Aún no está registrado?

Cree su cuenta. Regístrese en Elsevier y obtendrá: información relevante, máxima actualización y promociones exclusivas.

Registrarme ahora
Help - - Sign up - Phone number 902 888 740
Search
ISSN: 0870-8312

Ciência & Tecnologia dos Materiais (CTMAT)

Ciência & Tecnologia dos Materiais (Science & Technology of Materials) is the official journal of SPM, the Portuguese Society of Materials, providing a forum for publishing peer-reviewed papers related to both fundamentals of materials science and technological application of engineering materials. The scope of the journal covers a wide range of topics in materials science that are of interest to the SPM, encompassing electrochemistry, corrosion and protection of materials, extractive metallurgy and recycling, electronic and optoelectronic materials, biomaterials, forest materials, polymeric and composite materials, foundry, heat treatment and surface engineering, tribology, and fracture. Ciência & Tecnologia dos Materiais welcomes contributions in the form of original research papers, review articles and technical notes reporting advances on those fields, emphasizing new materials, new products and devices, and new technologies.

Metrics

  • SCImago Journal Rank (SJR):0,115

Indexed in:

ScienceDirect, Scopus
Contents of previous issue | Contents of following issue

Vol. 29 .Num. 1. January - April 2017
Número Especial: Materiais 2015

Influence of heat treatments on the sensitization of a supermartensitic stainless steel

S.S.M. Tavares, M.R. Silva, J.M. Pardal, M.B. Silva, M.C.S. de Macedo
Cienc Tecnol Mater 2017;29:e1-8

Correlation between the Meyer's law parameters and the wear resistance of chromium white cast irons

L. Goyos, A. Varela, S. Castellanos, A. García, J. Mier, M. Moors
Cienc Tecnol Mater 2017;29:e9-e14

Effect of heat treatments on Ni-Ti endodontic files

F.M. Braz Fernandes, A.R. Alves, A. Machado, J.P. Oliveira
Cienc Tecnol Mater 2017;29:e15-8

Functionally graded NiTi shape memory alloys

F.E. Ferreira, A.R. Alves, J.P. Oliveira, F.M. Braz Fernandes
Cienc Tecnol Mater 2017;29:e19-22

Influence of ageing treatment on the thermophysical characteristics and mechanical properties of forging wire Ni-rich NiTi alloy for superelastic applications

P.F. Rodrigues, F.M.B. Fernandes, E.N. Texeira, S. Baptista, A.S. Paula, J.P. Oliveira
Cienc Tecnol Mater 2017;29:e23-6

The use of thermal analysis to predict the dendritic coherency point on nodular cast iron melts

Vítor Anjos, Rüdiger Deike, Carlos Silva Ribeiro
Cienc Tecnol Mater 2017;29:e27-33

Experimental characterization of ceramic shells for investment casting of reactive alloys

Rui Neto, Teresa Duarte, Jorge Lino Alves, Francisco Torres
Cienc Tecnol Mater 2017;29:e34-9

Effect of the chemical milling process on the surface of titanium aluminide castings

Rui Neto, Teresa Duarte, Jorge Lino Alves, Francisco Torres, João Pinto
Cienc Tecnol Mater 2017;29:e40-5

Effect of explosive ratio on explosive welding quality of copper to aluminium

A. Loureiro, R. Mendes, J.B. Ribeiro, R.M. Leal
Cienc Tecnol Mater 2017;29:e46-50

Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys

M. Bexiga, A. Tavares, F. Melo, A. Loureiro
Cienc Tecnol Mater 2017;29:e51-5

Residual stress field and distortions resulting from welding processes: numerical modelling using Sysweld

Tiago R. Lima, Sérgio M.O. Tavares, Paulo M.S.T. de Castro
Cienc Tecnol Mater 2017;29:e56-61

In the search of nanocrystallinity in tool-steel chips

S.C. Godinho, R.F. Santos, M.T. Vieira
Cienc Tecnol Mater 2017;29:e62-4

Upward and downward unsteady-state directional solidification of a hypoeutectic Al-3wt.%Mg alloy

C. Brito, F. Bertelli, M.A.P. Castanho, P.R. Goulart, N. Cheung, J.E. Spinelli, A. Garcia
Cienc Tecnol Mater 2017;29:e65-70

Study of nanomechanical properties of (1-y)BST-yMgO thin films

Dionizy Czekaja, Agata Lisińska-Czekaja, Julian Plewab
Cienc Tecnol Mater 2017;29:e71-5

Microstructure and mechanical properties of Al/SiC composite surface layer produced by friction stir processing

C.M. Abreu, R. Acuña, M. Cabeza, M.J. Cristóbal, P. Merino, D. Verdera
Cienc Tecnol Mater 2017;29:e82-6

Optimization of MWCNT – Metal Matrix Composites feedstocks

T.J. Ferreira, M.T. Vieira
Cienc Tecnol Mater 2017;29:e87-91

Study on damping capacity and dynamic Young's modulus of aluminium matrix composite reinforced with SiC particles

S. Madeira, G. Miranda, D. Soares, F.S. Silva, O. Carvalho
Cienc Tecnol Mater 2017;29:e92-6

Effects of carbon nanotube modified adhesive layer on low velocity impact and flexural properties of cork core sandwich structures

I.A. Lopes, F.P. Macedo, A.J. Arteiro, A.L. Reis, P.R. Nóvoa, A.T. Marques
Cienc Tecnol Mater 2017;29:e97-e101

3D-reinforcement techniques for co-bonded CFRP/CFRP and CFRP/metal joints: a brief review

M. Tiago von H.P.F. Silva, Pedro P. Camanho, António T. Marques, Paulo M.S.T. Castro
Cienc Tecnol Mater 2017;29:e102-7

Design of a self-contained breathing apparatus (SCBA) using a carbon fibre reinforced polymer and filament winding

L. Fernandes, Rui F. Martins, Paulo P. Silva
Cienc Tecnol Mater 2017;29:e108-13

Strength and failure modes of single-L adhesive joints between aluminium and composites

N.R.E. Domingues, J.C. Trojan, R.D.S.G. Campilho, R.J.C. Carbas, M.D. Banea, L.F.M. da Silva
Cienc Tecnol Mater 2017;29:e114-8

Shear cohesive law estimation of adhesive layers by digital image correlation

A.C.C. Leitão, R.D.S.G. Campilho, J.C.S. Azevedo
Cienc Tecnol Mater 2017;29:e119-23

Shear fracture toughness and cohesive laws of adhesively-bonded joints

J.C.S. Azevedo, R.D.S.G. Campilho, F.J.G. Silva
Cienc Tecnol Mater 2017;29:e124-9

In vitro study of platelet behaviour on titanium surface modified by plasma

J.O. Vitoriano, C. Alves, D.C. Braz, H.A. Rocha, R.C. Lima da Silva
Cienc Tecnol Mater 2017;29:e130-4

Neuro-muscular regeneration using scaffolds with mesenchymal stem cells (MSCs) isolated from human umbilical cord Wharton's jelly

A.R. Caseiro, T. Pereira, J. Ribeiro, J.D. Santos, I. Amorim, A.L. Luís, A.C. Maurício
Cienc Tecnol Mater 2017;29:e135-9

Microreactors with embedded nanofibres manufactured by electrodynamic focusing

Ana Neilde R. da Silva, Demétrius S. Gomes, Rogerio Furlan, Maria Lúcia P. da Silva
Cienc Tecnol Mater 2017;29:e140-5

Local Surface Plasmon Resonance of metallic nanoparticles embedded in amorphous silicon

A. Fantoni, M. Fernandes, Y. Vigranenko, M. Vieira
Cienc Tecnol Mater 2017;29:e146-50

Alternative low cost based core systems for vacuum insulation panels

Flávia A. Almeida, Jorge Corker, Nuno Ferreira, Miguel A. Neto, Mizi Fan, Hermann Beyrichen, Roland Caps
Cienc Tecnol Mater 2017;29:e151-6

High-volume fly ash paste for developing ultra-high performance concrete (UHPC)

Iman Ferdosian, Aires Camões, Manuel Ribeiro
Cienc Tecnol Mater 2017;29:e157-61

Mechanical behaviour analysis of polyester polymer mortars reinforced with tire rubber fibres

S.P.B. Sousa, M.C.S. Ribeiro, E.M. Cruz, G.M. Barrera, A.J.M. Ferreira
Cienc Tecnol Mater 2017;29:e162-6

Mechanical behaviour assessment of unsaturated polyester polymer mortars filled with nano-sized Al2O3 and ZrO2 particles

S.P.B. Sousa, M.C.S. Ribeiro, P.R.O. Nóvoa, C.M. Pereira, A.J.M. Ferreira
Cienc Tecnol Mater 2017;29:e167-71

Mechanical characterization of mortar beams

F.A.C. Oliveira, S.V.B. Lopes, J.C. Fernandes
Cienc Tecnol Mater 2017;29:e172-6

Resistance of a nonwoven geotextile against mechanical damage and abrasion

Mónica Dias, José Ricardo Carneiro, Maria de Lurdes Lopes
Cienc Tecnol Mater 2017;29:e177-81

Shear resistance of concrete reinforced with ultra-high strength steel fibres

José Gomes, Carlos Sousa, Mário Pimentel, Ana Maria Proença, A. Serra Neves
Cienc Tecnol Mater 2017;29:e182-6

Use of advanced composite materials in strengthening axially loaded reinforced concrete columns

M. Cheikh-Zouaoui, N. Chikh
Cienc Tecnol Mater 2017;29:e187-91

Study of the interaction between asphalt and recycled plastics in new polymer modified binders (PMB)

Liliana Costa, Sara Fernandes, Hugo Silva, Joel Oliveira
Cienc Tecnol Mater 2017;29:e192-7

Foamed bitumen: an alternative way of producing asphalt mixtures

Liliana Abreu, Joel Oliveira, Hugo Silva, Catarina Silva, Daniela Palha, Paulo Fonseca
Cienc Tecnol Mater 2017;29:e198-203

Effect of incorporating different waste materials in bitumen

Sara Fernandes, Liliana Costa, Hugo Silva, Joel Oliveira
Cienc Tecnol Mater 2017;29:e204-9

Synthesis and structure of Bi5FeTi3O15 ceramics

Agata Lisińska-Czekaj, Julian Plewa, Dionizy Czekaj
Cienc Tecnol Mater 2017;29:e210-4

Influence of processing conditions on crystal structure of BiNbO4 ceramics

Agata Lisińska-Czekaj, Dionizy Czekaj, Julian Plewa
Cienc Tecnol Mater 2017;29:e215-8

MDF and PB activated carbons for adsorption of dyes from liquid phase

J.A.F.L. Gomes, B.C. Azaruja, P.A.M. Mourão
Cienc Tecnol Mater 2017;29:e219-23

Adsorption of MCPA, 2,4-D and diuron onto activated carbons from wood composites

I.P.P. Cansado, P.A.M. Mourão, J.A.F.L. Gomes, V. Almodôvar
Cienc Tecnol Mater 2017;29:e224-8

Adsorption of phenol on silica aerogels using a stirred tank and a fixed bed column

Joana Marques, Telma Matias, Artur J.M. Valente, António Portugal, Margarida J. Quina, Licínio Gando-Ferreira, Luísa Durães
Cienc Tecnol Mater 2017;29:e229-33

The role of tension-compression asymmetry of the plastic flow on ductility and damage accumulation of porous polycrystals

J.L. Alves, M.C. Oliveira, L.F. Menezes, Oana Cazacu
Cienc Tecnol Mater 2017;29:e234-8

Mechanical properties determination of dual-phase steels using uniaxial tensile and hydraulic bulge test

Rui Amaral, Abel D. Santosa, A.B. Lopes
Cienc Tecnol Mater 2017;29:e239-43

Tribology testing to friction determination in sheet metal forming processes

Anvar Makhkamov, Dipak Wagre, António M. Baptista, Abel D. Santos, Luís Malheiro
Cienc Tecnol Mater 2017;29:e249-53

Theoretical and experimental study of specimens with stress concentrators in dependence of stress triaxiality

Ana Maria Comanici, Viorel Goanta, Paul Doru Barsanescu
Cienc Tecnol Mater 2017;29:e254-61

Nondestructive testing in microfabrication using bacteria

T.J. Ferreira, A.R. Farinha, T.G. Santos, R. Miranda, C.C.C.R. Carvalho, M.T. Vieira
Cienc Tecnol Mater 2017;29:e262-4

Low-cost 3D food printing

Isaac Alves Ferreira, Jorge Lino Alves
Cienc Tecnol Mater 2017;29:e265-9

Urbcork – Urban furniture with application of high density cork

Mariana Alves, Lígia Lopes, Jorge Lino Alves, Francisco Xavier de Carvalho
Cienc Tecnol Mater 2017;29:e270-4

Study of the viability of manufacturing ceramic moulds by additive manufacturing for rapid casting

Edwin Ocaña Garzón, Jorge Lino Alves, Rui J. Neto
Cienc Tecnol Mater 2017;29:e275-80