Buscar en
Ciência & Tecnologia dos Materiais
Toda la web
Inicio Ciência & Tecnologia dos Materiais Environmental and economic life cycle assessment of polymers and polymer matrix ...
Journal Information
Vol. 28. Issue 1.
Pages 55-59 (January - June 2016)
Share
Share
Download PDF
More article options
Vol. 28. Issue 1.
Pages 55-59 (January - June 2016)
Full text access
Environmental and economic life cycle assessment of polymers and polymer matrix composites: a review
Visits
2085
C.A. Bernardoa,c,
Corresponding author
cbernardo@dep.uminho.pt

Corresponding author.
, Carla L. Simõesa,c, Lígia M. Costa Pintob
a Institute of Polymers and Composites/I3N, Minho University, Guimarães, Portugal
b NIMA -Department of Economics, Minho University, Campus de Gualtar, 4710-057 Braga, Portugal
c PIEP -Innovation in Polymer Engineering, Minho University, 4800-058 Guimarães, Portugal
This item has received
Article information
Abstract
Bibliography
Download PDF
Statistics
Abstract

The present work reviews studies on the use of the Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) methodologies for evaluating environmental and economic impacts of polymers and polymer composites. Current publications were reviewed and differences in methods and results discussed. It was concluded that literature results on LCA of polymers and polymer composites are generally consistent, showing that indicators, such as Global Warming Potential (GWP) and Total Energy Use (TEU) are generally lower than those of alternative materials. On the other hand, the economic literature is not so extensive and standard methods still need to be adopted, since different economic analysis methodologies were used in the studies reviewed.

Keywords:
polymers
composites
environment
life cycle assessment
life cycle costing
Full text is only aviable in PDF
References
[1]
J. Hopewell, R. Dvorak, E. Kosior.
Philos. Trans. R. Soc. B Biol. Sci., 364 (2009), pp. 2115
[2]
D.S. Achilias, C. Roupakias, P. Megalokonomos, A.A. Lappas, E.V. Antonakou.
J. Hazard. Mater., 149 (2007), pp. 536
[3]
D.S. Scott, S.R. Czernik, J. Piskorz, D.S.A.G. Radlein.
Energy Fuels, 4 (1990), pp. 407
[4]
A.k. Panda, R.K. Singh, D.K. Mishra.
Renew. Sustain. Energy Rev., 14 (2010), pp. 233
[5]
S. Albrecht, P. Brandstetter, T. Beck, P. Fullana-i-Palmer, K. Grönman, M. Baitz, S. Deimling, J. Sandilands, M. Fischer.
Int. J. Life Cycle Assess, 18 (2013), pp. 1549
[6]
S. Belboom, R. Renzoni, B. Verjans, A. Léonard, A. Germain.
Int. J. Life Cycle Assess, 16 (2011), pp. 159
[7]
S. Humbert, V. Rossi, M. Margni, O. Jolliet, Y. Loerincik.
Int. J. Life Cycle Assess, 14 (2009), pp. 95
[8]
F. Intini, S. Kühtz.
Int. J. Life Cycle Assess, 16 (2011), pp. 306
[9]
G.A. Keoleian, S. Spatari, R.T. Beal, R.D. Stephens, R.L. Williams.
Int. J. Life Cycle Assess, 3 (1998), pp. 18
[10]
M. Levi, S. Cortesi, C. Vezzoli, G. Salvia.
Packaging Technol. Sci., 24 (2011), pp. 387
[11]
S.M. Lloyd, L.B. Lave.
Environ. Sci. Technol, 37 (2003), pp. 3458
[12]
I. Muñoz, J. Rieradevall, X. Domènech, C. Gazulla.
Int. Life Cycle Assess, 11 (2006), pp. 323
[13]
N. Narita, M. Sagisaka, A. Inaba.
Int. J. Life Cycle Assess, 7 (2002), pp. 277
[14]
C.L. Simões, R. Simoes, J. Carvalho, A.J. Pontes, C.A. Bernardo.
Mater. Des., 52 (2013), pp. 196
[15]
S.P. Singh, V. Chonhenchob, J. Singh.
Packaging Technol. Sci., 19 (2006), pp. 279
[16]
R.B. Tan, H.H. Khoo.
J. Environ. Manag., 74 (2005), pp. 195
[17]
A. Zabaniotou, E. Kassidi.
J. Clean. Prod., 11 (2003), pp. 549
[18]
A. Ciroth, G. Huppes, W. Klöpffer, I. Rüdenauer, B. Steen, T. Swarr.
Environmental Life Cycle Costing.
1st ed., CRC Press, Publishing House Taylor and Francis, SETAC Press, (2008),
[19]
K. Shapiro.
Int. J. Life Cycle Assess, 6 (2001), pp. 121
[20]
J.C. Powell.
Waste Manag. Res., 14 (1996), pp. 515
[21]
European Commission, A Study on the Economic Valuation of Environmental Externalities from Landfill Disposal and Incineration of Waste, ed. DG Environment, Brussels, 2000.
[22]
A. Massarutto, A.D. Carli, M. Graffi.
Waste Manag., 31 (2011), pp. 2102
[23]
T. Swarr, D. Hunkeler, W. Klöpffer, H.L. Pesonen, A. Ciroth, A. Brent, R. Pagan.
Environmental life cycle costing: a code of practice, ed. Society of Environmental Toxicology and Chemistry.
SETAC, (2011),
[24]
C. Alves, P.M.C. Ferrão, M. Freitas, A.J. Silva, S.M. Luz, D.E. Alves.
Mater. Des., 30 (2009), pp. 4060
[25]
C. Alves, P.M.C. Ferrão, A.J. Silva, L.G. Reis, M. Freitas, L.B. Rodrigues, D.E. Alves.
J. Clean. Prod., 18 (2010), pp. 313
[26]
S. Ibbotson, T. Dettmer, S. Kara, C. Herrmann.
Int. J. Life Cycle Assess, 18 (2013), pp. 1137
[27]
A.D. La Rosa, G. Cozzo, A. Latteri, A. Recca, A. Björklund, E. Parrinello, G. Cicala.
J. Clean. Prod., 44 (2013), pp. 69
[28]
A.L. Roes, E. Marsili, E. Nieuwlaar, M.K. Patel.
J. Polym. Environ., 15 (2007), pp. 212
[29]
P. Schwab-Castella, I. Blanc, G. Gomez Ferrer, B. Ecabert, M. Wakeman, J.A. Manson, D. Emery, S.H. Han, J. Hong, O. Jolliet.
Int. J. Life Cycle Assess, 14 (2009), pp. 429
[30]
R.A. Witik, J. Payet, V. Michaud, C. Ludwig, J.E. Månson.
Compos. Part Appl. Sci. Manuf., 42 (2011), pp. 1694
[31]
R.A. Witik, F. Gaille, R. Teuscher, H. Ringwald, V. Michaud, J.-A.E. Månson.
J. Clean. Prod., 91 (2012), pp. 29-30
[32]
R. Zah, R. Hischier, A.L. Leão, I. Braun.
J. Clean. Prod., 15 (2007), pp. 1032
Copyright © 2016. Portuguese Society of Materials (SPM)
Article options
Tools
es en pt

¿Es usted profesional sanitario apto para prescribir o dispensar medicamentos?

Are you a health professional able to prescribe or dispense drugs?

Você é um profissional de saúde habilitado a prescrever ou dispensar medicamentos